HEAVY METAL
-
Posts
1,328 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by HEAVY METAL
-
THAT IS HOW I GOT THE CODE IN THE EXAMPLE BUT IT IS NOT EXACTLY WHAT I WANT H.M.
-
Easy now we have plenty of good machines that are only a few years old as well as a robot work cell that runs 3 edms and a graphite mill.
-
Thanks guys I'll look into that
-
My machine does not support canned peck cycle my code looks like following for a peck cycle.Does anyone no how to make the r value read the peck clearance value in the cycle params so it rapid down to this value N0001G80R0 N0002X+182500Y-7500 N0003G79Z-1500F75 N0004G80R0 N0005G79Z-3000 N0006G80R0 N0007G79Z-4500 N0008G80R0 thanks in advance heavy
-
The x and y axis are not reversed h.m.
-
How can i make my post pick up the plunge feed rate value for z moves.It is picking up feed rate instead. thanks heavy
-
THIS IS A CINCINNATI CIM-X 3 AXIS WITH A ACRAMATIC SERIES 5 CONTROL Z VALUES CAN NOT HAVE A + SIGN THANKS FOR THE INPUT ANYWAYS HEAVY METAL
-
Is the post change a simple deal or does it require alot of mod? thanks heavy
-
What do you mean design in z- thanks h.m
-
The mill i am programming for, the z axis is + into part and - out this is the opposite of what i am used to seeing.Do i need to change my post or is this a tool plane setting within mastercam. thanks h.m.
-
Thanks for the quick response h.m.
-
WITH CIMCO DNC CAN YOU TAKE OFF ANY WHERE IN THE PROGRAM OR DO YOU ALWAYS HAVE START AT BEGINNING. THANKS H.M.
-
We have a pc2100 control on a tree mill.My ? is does any one run long programs trickeling off the hard drive if you can even do this.If not how do ypu gusy handle long programs that won't fit on floppy thanks heavy
-
I moved them to mc9 folder they are cim-x post and thrust ring
-
I put these in mc9 folder new folder
-
Roger I have put the toolpath post and mc9 file on the ftp site.If yoou could take a look that would be great Thanks heavy
-
Divide by zero error: divisor < 1.0E-10 Postblock label plin I have been getting this error when I post Does anyone know what this means? thanks h.m.
-
My post (Post Name : ACRA900V # Product : MILL # Machine Name : CINCINNATI MILACRON # Control Name : CINCINNATI MILACRON # Description : CINCINNATI MILACRON WITH CDC P&Q SUPPORT) that i'm using does not open up in editor with g-code.This is the only post that does this.Is there a changer I need to make in the post so i don't have to go nc folder and open up nc file thanks heavy
-
I'm having trouble with my dealer coming off with the post cd.Everytime I ask about it he says he will send it to me,but I have not seen it yet.They have a guy who does post work for them and I get the vibe that the want me to come to then for post work.I have done a lot of tweaking myself with help from you guys,but that post cd would sure be nice. heavy metal
-
Working in some bottle cap molds
-
Hi Mark Try using the edit jump[ routine this should out put a Z value with G0 then repeat drill cycle for next hole.Let me know if you have any other problems that need worked out I'll take a look see if I can help. I had to edit the post for the edit jump routine to work right.
-
Hi John What kind of dynapath control is it.I have a post for a 30 and 40 that work great.As what Mark said about drill clearance plane try using edit jump this shoud output Z rapid move with a G0 then force drill cycle and position for next hole.If your using ver 9 the post will take clearance height as set in cycle parm. page and post the way a describe above.
-
I think i got it figured out.Thanks for suggestions heavy
-
I'm getting wron deg output with my post . table rotates clockwise to get from 0 to 90.I'm doing work on 270 side but post is putting this out at B90.What I'm I looking for in post to change this around.I tried changing the cw-ccw sign option ,but that didn't seem to work. thanks in advance H>M>
-
Thanks Rick for the info