THE FOREC TO CHANGE WORKS GREAT,BUT STILL OUTPUTS AN AT EVERY DEPTH OF CUT OR PASS.I.M I MISSING SOMETHING HERE THANKS HEAVY

ANY GRAPHICS PROBLEMS .DO ALL LAPTOPS HAVE ON BOARD GRAPHICS? OR DO SOME HAVE VIDEO CARDS?

ANYONE RUN MC ON A LAPTOP?

The problem that i'm having is if i have two different ops with the same tool # one right after the other.my operator would like an M00 between them.the way it is now the M00 is between them but it is also at every depth of cut in each operation.i have a finish pass and a freebie on two different bores . one operaton for each bore. the post is wanting to put a M00 between the finish pass and the freebie and between ops.the operator wants this stop so he can check bore and bumb ot cc if needed then move on to next bore.does anyone go about like this or do you guys do it a different way thanks heavy

I tweaked my post to output a M00 when misc int is greater than 1,but it is putting this value at every z depth of cut.I would like it to just put it out at beginning of each new operation.Is there something wrong with my code. thanks heavy ppause n, "M00", e ptlchg0 #Call from NCI null tool change (tool number repeats) pcuttype pcom_moveb c_mmlt #Multiple tool subprogram call comment if mi10 > 0, ppause pcan pspindchng if cuttype = zero, ppos_cax_lin if gcode = one, plinout else, prapidout pcom_movea c_msng #Single tool subprogram call

HI, MA I HAVE PUT A POST ON THE FTP SITE "DELTA 30" IN THE POST FOLDER, THAT I HAVE TWEAKED FOR OUR DYNAPATH 30.IT SHOULD BE PRETTY SIMILIAR GIVE IT A TRY, LET ME KNOW.WE SET ALL COMPS OFFSETS TO ZERO IN CONTROL AND USE COMP IN COMPUTER. THIS SHOULD ELIMATE THOSE BOG OFFSET JUMPS

i have placed a post titled cim-x changer on the ftp site.i want to get it to post a clearance height between holes on the a g81 cycle. it is just doing this at the start of the first hole. i any one wants to take a look and offer any suggestions thanks a bunch heavy

is anyone fimilar with this type of cutter comp using p&q vectors. i have tweaked a post that is almost there but,need some help thanks heavy

does anyone know how to specify what mill.set the setup sheet reads.suppose i want it to read the html.set post.i do i change that.i mc it just has the option of graphic or .set but not what .set.what folder does it look in for the .set file thanks heavy

is there a way i can make the set up sheet post peck depth and finale z depth with peck drill cycle? thanks heavy

i programming a horz mill and my post is set for horz but when i post code their is a B value for rotation.i started file by changing wcs to front and same for cplane and tplane.then i draw geo and place toolpath.i backplot and it shows tool approaching part correctly. but post is wanting to rotate table t0 b270.i guess my question is how to change post to look at front wcs as 0 thanks hm

when i go to toolpaths-operations and right click then select doc file mc seems to hang for a few minutes or more then the doc file appears.you guys experiencing any of this. HM

my computer here at the shop has a ATI-3d rage card in it.i just got done doing some 3d surface. machining and my verify of the tool path made the surface appear alot worse than it cut out at the machine. is this a video card problem or is mc's verify not up too par yet. i'm using mc 9.0 sp1.if it's a card problem i'm going to try to talk my boss into a upgrade. thanks heavy

how do i climb cut on this surface

i have uploade a file to the ftp server 3dp.mc9 in the mcp folder .i'm trying to step that radius and angle down along wall .wall is about 10 deg angle. i have tried flow line ,contour and para.all paths don't look like the are machining correctly. any suggestions would be great thanks hm

I'm pretty new to the form ,but you have responded to alot of my questions which has helped me out alot.there is plenty of good jobs out there for qualified people like yourself. stay positive see you on the fourm h.m.

i changed wcs to bottom without rotating any t/c planes this seems to work. i was able to draw geo and place toolpath on bottom side with out getting rotary code posting. i doing 3 axis work on a vmc . i trying to machine all side of part using one file. is this how everyone else does it? thanks for any suggestions heavy

i want to machine different side of part with out making my post put out a rotate code and with out having to transform or rotate the geo.i know there is a way to do this. thanks heavy

i want to do some work on bottom of part.so i have changed wcs to bottom and my cplane tplane and gview are all set with this view.james had said something about being able to verify the complete part top and bottom. without playing with stl files. when i verify the top of part looks good but the bottom is not verifying correctly.i think need to set a new origin in the z for the bottom toolpaths but this option is dimmed. can this work or am i dream'in thanks heavy

anyone fimilar with this nc machining center?

how do i force the x and y on every line.i.m using the mpcin850 post ver 9 mc thanks heavy

IS THERE A WAY TO GET THE PLUS SIGN TO POST WITH POSITIVE VALUES.I,M USING MPCIN850 POST. EX X+20 Y+20 Z+20 THANKS HEAVY

v9

how do you save a view thanks heavy

WHAT ABOUT A CONTROL THAT USE P40(CANCEL X AND Y DIR)P45 X DIR TO LEFT YDIR TOP ETC. P40 P45 P46 P47 P48 P49 P50 P51 P52