Jon @ T.E.C.T.

Verified Members
  • Content count

    132
  • Joined

  • Last visited

  • Days Won

    1

Jon @ T.E.C.T. last won the day on December 9 2018

Jon @ T.E.C.T. had the most liked content!

Community Reputation

963 Excellent

About Jon @ T.E.C.T.

  • Rank
    The Great Inquisitor
  • Birthday 08/12/1978

Recent Profile Visitors

2,059 profile views
  1. No, I want to load the subs to the internal card since that main memory is so small, and call them from the main program. As long as I name my files the same as what has appeared to be "registered" already I can run. So I can start this project tomorrow now but not being able to leave things named the way I have them already will annoy me to no end.
  2. Ok does the program numbers have to be registered somehow? I can take my program and give it the file name of one of the programs already on the internal card. Doing that allows me to call it using m198. Any name other than what is already shown in the internal card will give a program not found error.
  3. The settings are set so that you can run off the internal card using M198. But anything that I have loaded off my flash drive onto the internal card it will not recognize.
  4. I have looked at the programs on the internal card and tried to copy what I have seen there. I have taken the O number out and the % at the top just like the programs in the card and still no dice. I have tried with and without line numbers as well.
  5. Hi guys, I am trying to load programs to the internal card of our Mori Seiki from my usb drive. Every program that I have loaded when I try to open it and look at it on the control I get the specified file is an incorrect format error. I thought it was possible that I just couldn't load from my flash drive but I took a program from the machine memory and punched it to my flash drive and then read that same file from the flash drive onto the internal card and was able to look at it. I don't know what I am missing but this is starting to make me ill. Jon
  6. Jon @ T.E.C.T.

    General Programming Question

    lol The title says its a FZ 12K D, but seeing that they have 12K S on the body, I think someone put the wrong lable on the covers there.
  7. Jon @ T.E.C.T.

    General Programming Question

    Yeah I was looking at that book on Amazon just this morning and considering purchasing it.
  8. Jon @ T.E.C.T.

    General Programming Question

    I have done similar to you Terry, for programming the 4 axis Makino's at my last job, but that XY location was based on the center of rotation of the B axis and the Z was top of the pallet. It still followed the convention that your Origin was at center of rotation. And that is easy to do with TABLE/TABLE machines. The machine that the company is looking at buying is a Chiron FZ 12K S with a Fanuc 31i A control.
  9. Jon @ T.E.C.T.

    General Programming Question

    Jay, I think it does, unfortunately I don't have the quote on the machine to see what options they have quoted for us. I have the machine data sheet here that lists the horizontal and vertical distances from the spindle face to the swivel axis. Is the pivot point something that we have to calculate directly on the machine with a tool?
  10. Jon @ T.E.C.T.

    General Programming Question

    That could be the case, as is we haven't gotten the machine yet so it could also change from a head/table configuration. Me nor my collegue has ever programmed a head/table config. and as there are 31 of these part numbers that we will most likely have to complete in an insanely short time, we are scrambling to figure out as much as we can and prepare ourselves for what we are about to embark on. I came here to see how others may be handling doing things on a similar machine. We had to get the post to put out G43.4 which cleared up some of the undesirable results we seen in vericut. I just want to make sure that we are not overlooking a way of setting up the wcs that would make programming easier.
  11. Jon @ T.E.C.T.

    General Programming Question

    The way we got it currently set is X is at the face of the rotary Y and Z are at center of the the rotary. Rotary rotates about the X axis. The head rotates about the Y axis and the spindle is offset from the pivot point of the head, which further complicates things. We have played around programming the parts some and ran through vericut to see what we are producing and we are getting mixed results which leads me to believe that maybe we are looking at the wcs setup wrong.
  12. Jon @ T.E.C.T.

    General Programming Question

    I know in setting up a coordinate system for a part that you are programming on a 4th axis machine you normally want the coordinate system based on center of rotation. Same with setting up the coordinate system for a part for a 5 axis machine that is TABLE/TABLE. My question is how would you handle the coordinate system for a HEAD/TABLE 5 axis machine? Never set up a file for programming a HEAD/TABLE configuration and we have some parts coming up that we are buying a machine that is a HEAD/TABLE 5 axis machine. Trying to get a leg up on things before we are down to crunch time. Thanks in advance Jonathan
  13. Jon @ T.E.C.T.

    IN-100

    Thanks guys, we got a few days before the material gets here and I was trying to get a little info so that we don't go into this totally blind.
  14. Jon @ T.E.C.T.

    IN-100

    Every search I have done on this material says its tough to machine, we are grinding most features but some need to be cut with an endmill. Anyone out there cutting this type of material? Do you have any suggestions on tooling and speeds and feeds? Thanks in advance Jonathan
  15. Jon @ T.E.C.T.

    Mastercam for SolidWorks X6 testers needed

    Thanks, I will talk to them tomorrow about it.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us