Alien
-
Posts
139 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Alien
-
Hi everybody, When select "Finish Passes" option in 2D Blend Mill toolpath, Mastercam produces strange last move. I just created 2 parallel lines and selected different option for cutting method and compensation direction. I noticed, for any of this options, Mastercam produces last rapid cut in air. It seems as bug. Have anyone same problem? Thanks in advance, Sincerely, Michael.
-
Hi gcode, Thank you very much! Works very well! Sincerely, Michael.
-
Hi guys, Can somebody help me please resolve problem with multiaxis drill op. In attached file I need reverse drilling direction. I tried reverse line direction during hole axis function, but this not help. This op works correct only if I choose one hole for op and entity type "point" except "point/line". Thanks in advance, Sincerely, Michael. 5ax drill problem.zip
-
Hi JParis, Thank you very much for very clear answer! Your right 100%, But I am not understand something. Please look flie attached here. In this file I just created some 3 arcs and made same helix op with exactly same parameters and this works as I need. How explane this wonderfull issue? Thanks in advance, Sincerely, Michael. Helix bore bug.zip
-
Ok, sorry!
-
Ok, thanks,but ramp have no ability for finish pass (with different feed). Additional operation = additional time.
-
McamX9(see attached file)
-
Hi guys, Problem is that tool stays down in last hole and not retracts to retract distance. Only if I use clearance, all works well. Thanks for any help. Sincerely, Michael. Helix bore bug.zip
-
Hi, I tryied all this steps in McamX9 and have no problem. Strange, may be problem in hardware of your pc. Sincerely, Michael.
-
Hi, In operation manager, look upper right corner,click on the little arrow and choose font. For changing font in the toolbar, answered above. Good luck! Sincerely, Michael.
-
Shalom Alex! Thank you very much for answer and good idea! But if you need change holder diam or tool length, you need every time edit tool, instead changing values in holder tab. I think this faster and better way to verify toolpath and check it for collusions. Anyway thank you very much! Sincerely, Michael.
-
Hi everybody, On the holder tab, length of tool shown not fully. Have anyone see the same and how to fix this issue? Thanks in advance, Sincerely, Michael.
-
Hi, added zip folder. Thanks for help. Sincerely, Michael.
-
Hi friends, I have some strange collusion in op#11(see attached file). Is this a bug or may be somethihg wrong in settings. I will thank for any help. Thanks in advance, Sincerely, Michael. Machine simulation collusion.Z2G Machine simulation.zip
-
Hi everybody, I have very strange message when I verify all operation in attached file. Up to operation #41 all works correct, but from this operation(#41) I receive message about too long holder. I checked holder length, it's correct, but this message appear if I change holder to any other. Why this happens? I will appreciate any help. Thank in advance, Sincerely, Michael. Holder length problem.Z2G
-
Hi, Are you migrated config files from preview Mcam version? Check flie path were Mastercam looking machines. Sincerely, Michael.
-
Hi, as I understand it's helpful if your preview operation ends with 270 deg for 5-th axis, and next operation starts with -90 deg for 5-th axis. This is a same angle, but machine rotates 5-th axis 360 deg and this wasted time. To avoide this, change in misc initial secondary value to closest for start angle, for example to 250 in our case. Make change in second operation. I hope this help you. Best regards. Sincerely, Michael. Michael.
- 1 reply
-
- 1
-
-
Thank you very much! Sincerely, Michael.
-
Hello Greg, In additional to this ways I placed "Rotate G-view " and "Name and save the current graphics view" buttons to the toolbar and use them for creating new plane. I alsow use plane by solid face option. For 5-axis works I am using top plane and reposition model, like you make. Sincerely, Michael.
-
Thank you very much! I'll try this way. Thanks, Sincerely, Michael.
-
HI, Thank you very much. I'll try it. Sincerely, Michael.
-
Hi, ofcourse I tried stock model. One little problem is - if I open new file for side_2 I can't use stock model of side_1 for this file, becouse stock model require source operation of current file. I need save model after veifing side_1 , open new file side_2 and use the model as stock for side_2. I think, it's possible only with stl file. Thanks for help. Sincerely, Michael.
-
Hi, Thank you for answer. For this part I have 2 operation on the 5-axis machine, and I need reposition model for second operation. I just open new file for second operation, reposition model as I need and for accurate placing stl file as stock model, I want create point in origin position in stl file and from this point transform stl to new position,using xform. This way more simply for me, then count axis distances and angles for repositining stl model. Sincerely, Michael.
-
Thanks for answer.
-
Hi, I am trying to make some change to STL file, for exemple, create point in the origin position and change color of model. After this change I saving file as .stl, but after reopening flie it opens without any change. Can anyone help me with this issue? Thanks in advance, Sincerely, Michael. 802411-101_REV_5 after side_2.zip
