.jpg.4e4654c314bf9b121e9db8fbc34edc24.jpg)
FROZEN
-
Posts
292 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by FROZEN
-
That happened in x6 for awhile, I believe until MU3.
-
.thumb.jpg.59c7c31b8b42582687d671b680e087f2.jpg)
Y-axis lathe comparrisons
FROZEN replied to Bruce Caulley's topic in Machining, Tools, Cutting & Probing
Mori all the way, they are worth the money if your talking mill/turn(NL) and not their 5 axis(NTX) -
I have looked and was told Cat only, BT is being fazed out
-
what is the cost of Mazatrol post and do you need a special seat just for mazatrol or will a mill/turn work?
-
Small Lathe Recommendation
FROZEN replied to DTHOMSON's topic in Machining, Tools, Cutting & Probing
Doosan all the way. Mazak are ok but service and parts are to be desired. -
Thanks guys, I found out our machine is not capable.
-
looking to air blast thru the spindle, tried M152 that only blast for a couple seconds after every tool change, and now I can not get it to stop.
-
change at point in geo or in the machine group properties adjust feed on arc move might work
-
I have ran a lot of sinkers and magnets can play games with the burn, does any know if wire has similar issues???
-
We have a HCN 4000 that cuts great but the pallet change/location needs a lot of work. If running steel the is a good chance chips will get stuck under pallet. There no cones the have block for locating. Not to mention service and parts really is lacking and kind of support. Good luck if you get one we buy Makinos and had no problems with anything.