Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
ok,so for example my part (G54) on machine numbers is
X-65.1355
Y36.5778
Z2463.95
so at means I should move my part to this cordinate in mastercam ?
this is my part
I am sorry for stupid question ,but I am new off this .So what I have to do is send the machine to home and read the machine numbers and change in my macro for x and z ?
thank you ,let me try
thank you
Hello All ,I am start programing 2 boring machines ,one is Johnford with fanuc 31 i model b control ,2nd one is Toshiba BTD-13 F.R22 with tosnuc 8 cotrol .
I am looking some macro for calculation my offsets around table like B90 B180 AND B -90 .This some standard in the control ,or we have to update this ?
Thank you for any helping
This is testing part ,I will be use stainer manual back canterbore tool for 1st part
https://steinertechnologies.com/wp-content/uploads/2019-Steiner-Catalog-Email.pdf#page=11
Hello all ,I want to try use dynamic mill on my 4 axis machine ,when I am use axis substituton the tool is orientet opposite to my tool z axis ,what I doing wrong ?
SOLID.mcam
thank you so much
G00 G17 G90 G54 X-1.9 Y-.8251 S2200 M03
G43 H2 Z.25 M08
Z.2 __________coolant here
G94 G01 Z0. F150.
X7.15 F30.
what about the coolant ,I want to get in 2nd z position
Good morning all ,I want to add line G91G28Y0 for end my operation ,this is some settings on mastercam or inside off post ?
this is 3 axis standard mori seiki post
thank you
when I try crate new work offset from the solid face looks like masercam tilt part both direction ,i am want find out haw I can tilt the part one derction and rotate other
I am sorry Ron, when I am start this job I thought the one fixture with angle is not help me ,because you can see the packet is rotate 2 angles direction .But my ingenier use some function on creo and he set up this part on angle plate and rotate .What option I cane use for create the same on mastercam?
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.