mirek1017
-
Posts
892 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by mirek1017
-
i am working on 2023 but I have also older version Sir
-
when I try crate new work offset from the solid face looks like masercam tilt part both direction ,i am want find out haw I can tilt the part one derction and rotate other
-
thank you ,yes I am use his file and I like to know how I can do the same on mastercam
-
I am sorry Ron, when I am start this job I thought the one fixture with angle is not help me ,because you can see the packet is rotate 2 angles direction .But my ingenier use some function on creo and he set up this part on angle plate and rotate .What option I cane use for create the same on mastercam?
-
Good morning ,how I can calculate on mastercam something like this
-
The funny think is that we have a 5 axis table on ..... the attic, but the owner does not want to set up it because it is hard to spend 2000 $ but he will save $$$$$ on my settings on a vice:::))))))))
-
tolerance .002
-
I know that , i have square stock 3x3.2x1.76 I do not know how I can bite this ?
-
Hello all ,can some give me some idea haw make fixture for make holes and packet on this part in 3 axis vmc thank you for any help detail_43_rev_a3__out.log.1 T10-450-43-Final-Knockout.igs
-
Thank you so much for your help .I have instal 2023 beta so I can open your file and take look thanks one more time
-
Hello All ,can some one can take look on my rough op. I dont now why I have many colision color on the stock ,and looks like tool dont cleanup all material .Thank you for any help t-10-1384-212 fix new 3d mcx -fnl-frm-pun-rev-b.ZIP
-
Hello All ,question Can I set up and run 3+2 table on my Alzmetall machine with out OEM Kinematics’ My company get table and post for 3+2
-
Hello All mastercam gurus !We are bit slow in my shop ,so I try play on same 4 th axis toolpath .I am try use rotary advance ,my question is ,why when I am use rouging option the tool make shorts cuts first ,then run around my parts ,This some thing with my settings ,or the toolpath work this way .Also when I use the finish option looks like tool make some stupid plunge on end of the toolpath .Thank you for any helping . This is my sample Gearless_transmission.zip
-
Hello All ,what is the best settings for get constant step over for 3d finish waterline toolpath ?
-
Ron can you give me idea how use rough 5 axis packet for this sample thank you rotor.zip
-
Parallel toolpath is my friend :):):)
-
thank you for you time Ron
-
Haw I can kept run the toll in Y center ? flow 5 axis .mp4
-
I am sorry ,yes when I use pattern surface is better
-
this my settings and still shows me collision
-
Ok ,so I should working on top top top all time ,I need to see you sample from internet Op 8 . toolpath looks god ,but what setting I should use for colision tool and part like on the pic ?
-
Thank you Ron, Let me fix this and try one more time
-
Hello All ,can some one can help me how set up my flow 5 axis tollpath on my part on least operation . I am post my sample thank you ball._new_size_emcam.zip
-
I am working on home learning edition ,file is to big .I cant make zip to go on this version
-
how I can fixt this linking on my machine simulation? .mp4
