Good morning All, I have some small job for engrave letters ,but when I open my auto cad file I cant mark chain for my toolpath .I think I looking for option change the note for spline or lines ,but I cant find this option .Ore this is other way to do this this is my file ,thanks for help CHAIN.mcam

you have to send them beck ,you need post for 2019

last 10 years I try find some shop when I can learn from some one ,no luck .Everything what I now is from this webside or youTube .No one send me for any training for mastercam or some type of control

Thanks for your reply ,

cam -eleon ,can you select on swarf toolpath 2 sides on surface ,the tool can run on surface from left to right and jump to others side and the same time run from right to left ???

try start from -.01 om deep settings

sorry ,go to deep settings and set top to Z0

contour finish toolpath ??? ANGLED_HOLES.mcam

thanks for your time

Ok ,my question was ,Can I run this back and forth like on this video use 5 axis toolpath on mastercam???I do not ask for you time and program .simple question yes ore no

I asked what 5 axis toolpath I can use for get same thing like this .I am not 5 axis expert .When I try morph 5axis I can finish only one side (wall ) the make other one for other side .This sample show ,haw you can finish this part run both sides . thank you Rich

Thanks Rich ,I now this method .Foe simple stuff this will be work ,but I thought more complicate parts .Like this have variable pitch and I like to machining all surface .

this is about toolpath to , haw I can get same result on mastercam .This is 4 axis option from other cam software .I now I van use morph toolpath and finish one side and use other toolpat for finish 2nd side .But I like to run back and forth AUGER_(1).mp4

thanks ,I set up my z one more time ,looks good now ,but the wire broke all the time ,I slow down feed to 20 % and run slow .I will cut flat first ,then the 4 axis part I will set up for night thanks

looks like the postprocesor calculate wrong angle on this the 2nd thing is limit stroke on v

ok ,got it the u and v was not activate on the control ,thank s one more time for yours time

ok guys ,I try run this on my wire machine .We have Sharmilles Robofil 690 and show me alarm " taper uv mode is not compatible with the program "There is same sething on the control activate this thing ?? this is mu codes O99 ( DET ) ( 4 AXIS PROGRAM ) N1 G90 N2 G92 X-3.3171 Y1.07055 I2.28684 J.26884 N3 M60 N4 G41 G01 X-3.17518 Y.87004 Z.26884 U.17472 V-.57472 N5 X-2.21736 U.57472 N6 X-2.20581 Y.86964 U.57484 V-.57473 N7 X-2.19423 Y.86842 U.5749 V-.57474 N8 X-2.18267 Y.86639 U.57485 N9 X-2.17119 Y.86356 U.57473 V-.57472 N10 X-2.15985 Y.85994 U.57453 V-.57465 N11 X-2.14871 Y.85553 U.57428 V-.57452 N12 X-2.13783 Y.85037 U.57398 V-.57434 N13 X-2.12726 Y.84448 U.57366 V-.57409 N14 X-2.11708 Y.83789 U.57335 V-.57377 N15 X-2.10732 Y.83063 U.57304 V-.5734 N16 X-2.09805 Y.82274 U.57278 V-.57297 N17 X-2.09148 Y.81649 U.57471 V-.57472 N18 X-1.41337 Y.13837 U0. V0. N19 X-1.40313 Y.12844 U.00369 V-.00343 N20 X-1.39259 Y.11881 U.00766 V-.00662 N21 X-1.38177 Y.10951 U.00052 V-.00041 N22 X-1.37067 Y.10054 U-.00135 V.0011 N23 X-1.3593 Y.09191 U.00282 V-.00202 N24 X-1.34768 Y.08363 U.00447 V-.00301 N25 X-1.33581 Y.0757 U.00256 V-.00161 N26 X-1.32371 Y.06813 U.00055 V-.0003 N27 X-1.31139 Y.06093 U-.00156 V.00092 N28 X-1.29885 Y.05411 U-.00377 V.00202 N29 X-1.28612 Y.04767 U-.00605 V.00302 N30 X-1.2732 Y.04162 U-.00147 V.00067 N31 X-1.26009 Y.03596 U-.00002 V.00001 N32 X-1.24682 Y.0307 U-.00236 V.0009 N33 X-1.23341 Y.02584 U.00246 V-.00083 N34 X-1.21985 Y.02138 U.00418 V-.00126 N35 X-1.20616 Y.01735 U.00191 V-.00051 N36 X-1.19236 Y.01372 U-.00036 V.00012 N37 X-1.17845 Y.01052 U-.00268 V.00061 N38 X-1.16445 Y.00774 U-.00506 V.00098 N39 X-1.15038 Y.00537 U-.00747 V.00123 N40 X-1.13624 Y.00344 U-.00234 V.00031 N41 X-1.12205 Y.00193 U-.0006 V.00008 N42 X-1.10782 Y.00086 U-.00404 V.00027 N43 X-1.09356 Y.00021 U.00112 V-.00003 N44 X-1.0793 Y0. U0. V0. N45 X.08425 U.027 N46 G40 Y.24565 U0. V0. N47 M50 N48 G00 X-3.3171 Y1.07055 N49 M30 %

can you send me some video sometime ???

thank you all you guys for help

I try this way 10-1245-134 solid for wire .stp

thank you Ron ,what about this 10-1245-134-ins WIRE 4 TH AXIS 1.mcam

thanks

thanks del 10-1245-134-ins WIRE 4 TH AXIS OLD VER.stp

STP FILE ???