Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
sorry you may be right I am not a rotary expert but it does interest me so I tried what you said and got that message.We do some rotary here but its just index then machine I am afraid some day we will get a job like your example and not be able to do it
this might be a silly question but what if you don't have the 5ax multi surf option.I tried this and got a 5ax option not available contact reseller.Is there a reasonably good way of doing it with 4ax rotary
its probably because one is climb and the other is conventional milling you should always climb mill when possible then make another spring pass to clean it up
Z on a HRT-210 is 6 inches from table or whatever else it may be sitting on,so when I set up tools I touch off the table then put a 6 inch z offset in the machine control
thanks JP but I found the solution in a previous post it was par 43 in hass control.You know these forums are great I am here by myself and the only way to get help is here.You guys are great
that would be the next step its just that we use our rotary so very seldom it seems to be easier to work around issues.I am going to look into this because I,m the only one that knows how to run it and it does get frustrating sometimes doing jobs by winging it
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.