Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi all
I get the error report dialog box when I open up mcam X2. I did a search for this and found some info but it was for a side by side install. I did not do a side by side. Not sure how to get rid of it.
Thanks for any info!
Mike
Hi all
Not sure if its a setting I am missing, just wanted to see if anyone is having any backplot issues with X2. When I click the play button my tolls are moving very slow. If I step through with the "S" key it is fine. It is also fine just sliding the slider back and forth. I'm thinking a setting is changed but can't find it yet
Ok guys hate to beat a dead horse but.......
I have a choice of two cards both in the same price range. The quadro fx 1500 or the geforce 7900 gtx.
What to do what to do??
Heavy thats how I ran my first order I just finished up. The only thing I didn't look into that might help is a wiper insert. I have not had an application for one before. Anyone have experience with them?
Thanks for the suggestions gang!...
I'm just finishing up an order now. I was not having any issues with the flatness just chatter. (Have some flatsanding to do...grrr)
I will try some flycutting on my next run and let you know how I make out.
Tim
I don't have much fly cutting experience. With something like this am I correct to want a small radius tool so not to push on the material? Do you have any tool bit suggestions to use in the flycutter? And also maybe some starting speed and feed parameters.
Hi all
I have this extruded heatsink that I need to skim the bottom flat within .001 with a 32 finish. Anyone have any tooling suggestions? I will be holding it with a wedgeclamp pushing against a fixed stop. I can only cut between .005-.010 off the part. So far I have tried a 2.00 45° face with not much luck. Some parts cut nice but others chattered
Thanks
Mike
Mark
You are right. If I translate or rotate with the main level on, the box is there but goes away after I hit accept. I then turned my main level off and did the samething. I had no box on my clamp level but then turned the main level back on and the box was on the main level...
Hi all
I get this quite often and not sure why. I just merged a DE-STA-CO clamp into my file and when I rotate it to the right orientation for my file I get boxes around the clamp. Any ideas why?
Thanks
Mike
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.