Oh, so that's how they fixed it. Yet another reason to move up to bigger and better. Can't convince the boss though. Thanks.

Couldn't find the answer that I wanted, so I am bumping this one. I too, want to copy entities from one level to multiple levels at once. Any suggestions?

Try creating a solid that will have an edge that bisects the desired feature and use that as your verify stock. HTH Shane

May have a fix. Will post as soon as part is done. Will have pics. BTW. Craig. Sshhhhhh! Shane

quote: Do they not know how to draw? Careful! A wise man once said, "Those who anger you, control you. Shane

Brett, The snippit from above is from Mazak. We can define what it all means. It just looks like there is some code missing . Just some clarity from anyone who has maybe been there done that is what I am looking for. We have tried to use Mazatrol to bring up the sub spindle but can't seem to make it work. Shane

Letsa bump it one time.

quote: I was just wondering if we were the only ones. No Bruce, you aren't the only one. Come on MR2. Shane

I have an application where I want to use the sub spindle on my Integrex 400-III S as a tailstock to hold my part to a mandrel on the main spindle. I am going to turn a center in the sub chuck and have a center drilled cap on the front of my part and I want to bring the sub spindle into position to put pressure for a five axis milling operation. The code I have from Mazak is this... code: G110 Z2 M508 (press mode on) G98 G31 Z??? F5. G111 M509 (press mode off) M511 (spindle sync active) M03 I saw some helpful code from here Transfer Code for Mazak Integrex Could anyone elaborate on this? Thanks, Shane BTW - Can't reply til tomorrow 4-13.

Yeah, I'm still here. But prolly not much longer. Shane Aaron

+1 to everyone but the 1st guy. Shane

http://www.emastercam.com/cgi-bin/ultimate...ic;f=1;t=008770 Look here also. Shane

Welcome to the forum, sir. I program a 300SY with the same control. I agree with Ron on this one. Use subs. Shane

A part for a dirt track race car. . . . . . . And some these... . . . . . . . . . . . . . . . . . . . . Shane teh knee deep in the cool stuff!!!!!!!!

Wanna know who gave how much to whom? The website tells how much a person contributed to what party or person. Gives address of contributer, occupation of contributor, the date given, the amount given and to whom. Its all legal public info. Left side. Halfway down. Look for "Look up Individual Donor". Enjoy! http://www.opensecrets.org/ Shane teh

I would personally like to thank Mr. Mofo for starting this thread. I got a lot of good laughs and, well, feel a little closer to all of my forum friends for having read all of the posts. Thanks for the frenzy, mofo. Shane

Geez, James. Your up early. Shane teh sippin' java on the east side!

On fork trucks. Remove one of the spark plug wires from the spark plug and run it up between the seat and seat back so that it makes contact with the drivers butt. When he hits the ignition... WWWWWWWWWOOOOOOOOOOWWWWWWWWWWWW!!!!!!!!!! I've been on the recieving end of that one! Shane

Thanks for making this .com possible guys. Love it! Love it! Love it! Shane

I feel that the O/T is good for this place. It is a community of people with a common bond. Not Scott Bond. J/K Scott. Mastercam is that bond. We come here to vent frustration, poke fun at each other, argue about polititcs or who is the Nascar points leader. Why? Because we have all developed a freindship here. And friends like to talk to each other. If not on the phone then here or thru email. I consider these guys and gals my friends and I like to talk to them. So, don't trash them please. They just like to talk. Oh yeah. Webbie add to my count, plz. JM2C Shane

No, sir. Shane

Thanks, James.

Millman, I like your response. I talk to other men in other companies who absolutely hate their job. When they ask how I like my job? "I love my job", is my reply. I too, would do this for free if I could support my family doing it. Shane teh call me

55 and not a cloud in the sky. I would kill for some snow Shane

Just got out of a meeting with the Senior programmer, V.P. and the salesman for Yasda. I am impressed!! Shane