mig
-
Posts
852 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by mig
-
-
Hello ,
Here is my code for doosam -Puma 240 ,Fanuc 21i control :
------------------------------
G28 G00 U0.0 W0.0
N2 G00
N3 G20
N4 G99
N5 G50 S1600
N6 G54 T0505 ( T5 SPOT TOOL .5 DIA. INSERT - NONE )
N7 G00 X10. Z0.25 M3 S1200
N8 X0.
N9 Z0.1
N10 G81 Z-0.1328 R0. F0.01
N11 G80
N12 G00 Z0.1
N13 Z0.25
N14 X10.
N15 M09
N16 T0500
N17 G28 U0.0 W0.0
N18 T0500 M05
N19 M01
------------------------
Getting alarm for IMPROPER G-code ON BLOCK #8 .Can you guys explaine why ?
Thank you in advance .
-
Thank you Chris .
I added line you recomend already.
What about " stock left " value in the coments ?
-
Hi ,
Working on lathe -fanuc 21 post . Where i can get some instr. how to use debugger ?
How to get "stock left x and z output in post for lathe ?
Here is my code
-----
START TOOL LIST)
( T1 OD ROUGH RIGHT - 80 DEG. CNMG-432 )
(END TOOL LIST)
N1 G00
N2 G20
N3 G99
N4 G50 S200
( ) would like to have G28 U0 W0 line here
N5 G54 T0101 ( T1 OD ROUGH RIGHT - 80 DEG. INSERT - CNMG-432 )
N6 G97 S200 M03
N7 G00 X10. Z0.25
N8 Z0.1951
N9 X2.3452
N10 G01 Z0.0951 F0.01
N11 Z-8.8283
N12 X2.424
N13 X2.5654 Z-8.7576
N14 G00 Z0.1999
N15 X2.3164
N16 G01 Z0.0999
N17 Z-2.1337
N18 G03 X2.3435 Z-2.5276 R5.7432
N19 G01 Z-8.8283
N20 X2.3652
N21 X2.5066 Z-8.7576
N22 G00 Z0.2
N23 X2.2876
N24 G01 Z0.1
N25 Z-1.961
N26 X2.2938 Z-1.9941
N27 G03 X2.3364 Z-2.3264 R5.7432
N28 G01 X2.4778 Z-2.2557
------------
thank you in advance
-
Hello,
What advantage and disadvantage to locate mmd ,control files on server ?
thank you
-
hi Ajmer ,
Looks like it what do i need !!!
Thank you for your help .
-
Thank you for the replay .
my problem is when machine (tool) from initial position (x,z switches) moving on rapid (G0) to program initial point ( example X2.0 Z0.1) it moving on 45 deg angle then what is left over on Z moving straight . If i am using center it could crush into the turret.
To avoid crush i would like to let machine move on home position first ( example x5. z0.25)
Thank you
-
Hi,
How i can force in G-code output "Home position " after tool change.
right now i have next output :
N100 G00
N110 G20
N120 G99
N130 G50 S3500
N140 G54 T0202 ( T2 OD FINISH RIGHT - 35 DEG. INSERT - VNMG-431 )
N150 G96 S200 M03
( ------RIGHT HERE -------) I would like to have "Home position" defind volume .
N160 G00 X2.0185 Z0.1
N170 G01 Z0. F0.005
N180 Z-0.5412
N190 G02 X2.0216 Z-0.574 R0.3531
N200 G01 X2.284 Z-1.9804
N210 G03 X2.3335 Z-2.512 R5.7226
N220 G01 Z-8.8583
N230 X2.4749 Z-8.7876
N240 M09
N250 G00 X5. Z0.25
N260 T0200 M05
N270 M30
Thank you in advance
-
Looks like nice creation . Is it available for everybody ?
-
Nice part ,
I would start rough from flat bottom side . Use HSM toolpath . Rough pocket(hole) on half deep , use dinamic area t/p than another half from the top
-
thank you Jon , but it changing color of whole text ,i want to change only name of group for example .
What is " Line color" there ?
-
Hello,
Is it possible to change color of Tool Path Groups name text ?
Thank you
-
Hi,
I have to open huge .stp file (files) from PROE.
Which software has the best .STP ,STEP converter ?
Thank you
-
So after a few more weeks with no problem, we had another "incident."
This time instead of the tool just taking off in rapid at a random point in the program, the symptoms were a little more interesting. While in the middle of a sub program running on the second part (each sub runs 8 times per cycle) the machine decided it was not going to finish this sub program, but instead it retracted to Z0, called up the first tool, and started running the main program from the very begging.
I know the operator wasn't involved this time for sure, as I was standing right there when it happened.
A repair tech should be coming to look at the machine soon, and the first thing I will have him check is that the machine is properly grounded.
Are you sure you are not too close to limit swiches ? Let say you using long tool , so you are close to z limit when you going from point to point
-
Thank you.
-
Can i check on conntrol what type of DNC we using ?
-
What about using Ethernet connection? It not allow any logical branches in code .
-
We cut this kind of stuff often . Iscar
Insert works just fine
-
find a speed that produces the least amount of vibration at the spindle head , this will help protect the cutting edge and ensure there is not any dynamic runout out from vibration
Also i woud go for smaller DOC but faster feed.
- 1
-
-
Make sure you are not doing any feed movement if you are on limit switches (z for example).
This could be a reason
-
I usually open about 300MB+ step files (complete model of injection mould) and it takes about 2 or 3 hours to open it. After opening it is little slower, but after i found part i need and save it in separate file its ok.
For one kind of job i always create about 100+ MB mcx file (a lot of komplex free surface solids with toolpaths) and i must say that with these files MC became little unstable, i have to save job every 10 mins, because crashes when doing some operations with solids became more often. But it can be solved by splitting file in parts. Reopening is faster than, because i can open only file with part i curently need. But I do not complain, because second best won't it :-) Mastercam is the best for me.
I found same thing mastercam become unstable and do weard stuff when file grovs.
-
X6 MU2
I have following problem.
1-st
I created drilling operation. Again to edit operation, choose other geometry (point, arc) from toolpath type page, press button "apply" - Mastercam crashed.
2-nd
Again to edit operation, change type of operation (from drill to cirle mill or helix bore), press button "apply" - Mastercam crashed.
I have checked up it on three computer with different operation systems and have received identical result: Mastercam crashed. There is no difference between win7 or win XP or Vista, between 64 and 32 bit operation system.
Anybody have the similar problems?
Editing geometry in drilling operation works fine if you pick on Drill points manager in Operation manager.
So far i don't have any crush.
I had some crushes on my laptop when i do quick varify.
-
true, mastercam don't like big files
-
FBD does not work for 4 axis. same as FBM
Hmm i see the tab (option)
Dossan Puma 240 drilling cicle
in Industrial Forum
Posted
Thank you SAMCRO , it works .