Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Stephen J Van Dyne

CNC Software
 View Profile  See their activity

  • Posts

    26

  • Joined

  • Last visited

 Content Type 

Everything posted by Stephen J Van Dyne

  1. Stephen J Van Dyne
    In 2021 note text is no longer stored in the memory table. The only memory table items used by nesting would be the sheet names & materials, part names, labels & materials, and group names. These items are used to load the dialog pages and regenerate the final nested result. This memory table ids are stored in the nesting operation's toolpath entities and are not visible to the user. I don't believe toolpath entities are available through the API.
  2. Stephen J Van Dyne
    Have you reported the issues you are seeing in 2021? There was several nesting text issues fixed in 2021 when opening 2020 or previous version files. Some text was being assigned to the wrong fields, such as part labels showing up as material names. If you haven't please report the issue so we can address it a 2021 patch. Thanks, Steve
  3. Stephen J Van Dyne
    In X5 and beyond the default Tool Manager reports are set in Configuration-Reports. If you want a customized report, create a new set of rpx files or change the existing ones using the ActiveReports Designer located in mcamx5\common\reports.
  4. Stephen J Van Dyne
    Your "profile tolerance" when adding operations (try 0.001, instead of 0.010). Also, your nesting "resolution"... fine, medium or course (try a user-defined value of 0.100 or 0.010). With the suggested values it should be very accurate.
  5. Stephen J Van Dyne
    yes
  6. Stephen J Van Dyne
    nesting solid ops is in x5
  7. Stephen J Van Dyne
    it might be your mouse... try slowing down your double click speed or... try pressing the mouse and holding it down as you move the part.
  8. Stephen J Van Dyne
    yes.
  9. Stephen J Van Dyne
    It creates "new" views not "named" views but that is definitely a good idea. Thanks.
  10. Stephen J Van Dyne
    The nesting corner and fill direction specify how the parts are placed on the sheet. Also, allowing the parts to be rotated will normally pack the parts closer and fill up the margins.
  11. Stephen J Van Dyne
    You can use the ActiveReports Designer to modify the nesting report's RPX template. This allows you to customize your reports.
  12. Stephen J Van Dyne
    To nesting 3d geometry... create a 2d boundary around the objects, add this boundary as a part in geometry nesting then use the "attach" function (part page right click) to attach the 3d geometry.
  13. Stephen J Van Dyne
    Please describe the steps in as much detail as possible so I can reproduce this. Thanks
  14. Stephen J Van Dyne
    Are you nesting each file as a cluster or as individual operations? When nesting a cluster all ops must use the same wcs and all tplanes must be parallel to that wcs. In that case, all ops in the file must have the same wcs. If you are not nesting clusters but each op in the file represents a part then their wcs value should be maintained. Meaning the view might have a different view number but its actual definition should be the same. If this not the case, there may be something we need to look into. Thanks.
  15. Stephen J Van Dyne
    Please clarify what you meant by "I set the material thickness after nesting"? How are you setting the material thickness after nesting? Thanks.
  16. Stephen J Van Dyne
    Colin... a better method for rotating the part is using the +/- keys while moving the mouse. Remember you can also hold down the CTRL key while pressing +/- to rotate by 1 degree.
  17. Stephen J Van Dyne
    The XML file is generated dynamically each time you run a setupsheet. If you search the forum there is an XML outline which lists all the fields contained in the XML file. As for other data, in the coming X4-MU1 release, there will be user-defined data which the programmer may add using the designer. The system will prompt the operator for this data each time a setupsheet is run. Is they other types of mastercam data you would like us to include in future releases? Please let us know.
  18. Stephen J Van Dyne
    There is a known bug when capturing images in X4 and Vista. X4-MU1 will address this issue along with correcting the overlay problem. Images are also captured at much greater speed.
  19. Stephen J Van Dyne
    Sorry about that misspelling above... "Most RPX files"
  20. Stephen J Van Dyne
    XML OUTLINE HERE!
  21. Stephen J Van Dyne
    Most rpc files (pages) contain a bookmark reference. These controls should be hidden, not deleted. Or if you delete them, you must click on the scripting tab and delete the scripting from all the associated files. These controls all share a common name "Data_NAME". For example, on the main page - the machine name has a "DataField" of "MACHINE-NAME" and a "Design" "Name" of "Data_NAME". This control is used for creating bookmarks at runtime.
  22. Stephen J Van Dyne
    If you start from scratch rename "Detail1" to "Detail". There is a bug in the preview code.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...