Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
In a George Carlin Voice :
It used to say
“Continue” if its o,k. with you?
Now it says
" Not meant to Run more then one instance
Could become unstable ,Cause serious harm and or Death"
Hi Guys
I have been putting this off for a decade...
My Post outputs this:
%
O11
(04-12-08 TIME=14:00 )
(T11 DIA=.0565 RAD=0. ROUGH.....)
(T04 DIA=.0252 RAD=0. ROUGH.....)
(T05 DIA=.0252 RAD=0. 3D-CONTOUR)
Can I get it to say this :
%
O11
(04-12-08 TIME=14:00 )
(T11 DIA=.0565 .003 P/S .25 L.O.C. RAD=0. )
(T04 DIA=.0252 .003 P/S .50 L.O.C. RAD=0. )
(T05 DIA=.0252 .003 P/S .25 L.O.C RAD=0. )
Without a major overhaul!?
My Post:
[post_VERSION] #DO NOT MOVE OR ALTER THIS LINE# V10.00 E1 P0 T1138128734 M10.00 I0
# --------------------------------------------------------------------------
#| MASTERCAM MP POST PROCESSOR
#| CNC Software, Inc.
#| Control Model: HURCO I.S.N.C.
#| Machine Model: HURCO
#| PST File Name: MPFAN.PST/TXT |
#| Executable : MP.EXE 3.12
Thanks
Tony
[ 12-04-2008, 03:47 PM: Message edited by: Tony_Microplastics ]
At Tony's request... see the following link regarding this issue.
Transform Topic from Main Forum.
[ 12-04-2008, 01:28 PM: Message edited by: CNC Apps Guy 1 ]
Still broke by all means...
Is it true only the Backplot and verify
show a wild "Bowl of spaghetti" toolpath but it will post a true Mirror ?
Mirror is the Bottom of a lot of my parts!!
Transform is my SubProgram!!
Thanks
Tony
File Path's were good..
Re installed MC , Fixed.
The only thing I did that started the error
(Oh NOW it comes out)
Was copy the cfg / mtb / tools/ OP's unto a
USB Flash to load at home. (X2 @ home)
When I brought in a X2 file to work and started working on it here with X3.
The error started.
Hi Guys
Lately I have been getting the pop up error
"Corrupt or Invalid file.Contact your local Mastercam dealer"
every time I move around in any of my Toolpaths.
Also When I start a new toolpath It says
My This or that Default not found.
I ran the MCX3 setup repair over it today but that didnt fix it.
I can still work I just have to click away the pop up every single move I make.
Any other options besides a re install ?
Thanks
Tony
Chip
Which Category is it in?
(That's what i'm after).
Midwest
My right hand is complaining
that the left isn't pulling its share of the programming so it's gotta be ALT V etc.
X3 Create letters / "True type fonts"
ignore my set drafting options commands
(But they show up in the preview though)
Work around, rotate them with X form later.
X3 Translate
Puts a duplicate toolpath down not over to the specified location.
Work around, tell MC go 3 times over.
One will be a duplicate where the original was and the other will be where you wanted it to go.
Disable posting on the original toolpath.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.