Columbo™
-
Posts
719 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Columbo™
-
I have also tried the extend contour length. This works with no problem with regular lathe rough turn. The issue is with the canned rough. It seems like the leadins aren't working correctly in the lathe rough canned.
-
yer welcome
-
also solid / layout works
-
I have tried that, it still move in rapid
-
Is there a way to get MC to output feedrate instead of rapid approach into the material in rough canned. I get a tool collision with stock alarm. I know you can adjust it in regular rough but I can't seem to find it in the canned rough. Thanks
-
Hope its changed soon, I also was told of this change
-
same here
-
Cool! I'll have to give it a try. Hope it works.
-
is it displaying the holder
-
Move the slide to macine quickly
-
Thanks guys
-
Is there a way to permanently change the max spindle speed for lathe? Thanks
-
Thanks no 5x here yet
-
Thanks Thank Mr Mori's guys for vagueness
-
Enlighten us. I looked but didn't see anything
-
I know in MC the blank gets put on that level so they are easy to find
-
Thanks again del
-
Can someone explain how "screen", "hide entity" works. I thought that after clickin "hide entity" then click a line that line should hide. It seems to work in reverse or am I not understanding this the right way.
-
Thanks Bryan, I don't know why but I must have been blind earlier. I just didn't see it. Thanks again
-
try this http://www.metalsuppliersonline.com/resear...eWeightCalc.asp
-
No, it's an Okuma control (OSP-E100L)
-
JDowe, where do the tool numbers get changed on that page? I don't see a place for tool numbers. Maybe I'm in the wrong place. Thanks
-
No I haven't, why? What would happen?
-
This is what I output N1130T70 N1140M06(1/4-28 RIGID TAP) N1150G90G00G54.1P2X0.Y-.44A90.S280M03 N1160G43H70Z5.M08 N1170G95 N1180M29S280 N1190G84G98Z.9R1.5F0.0357 N1200G00G80Z10.M09 N1210G94 N1220G91G00G30Z0M05 N1230M09 N1240G28X0Y0 N1250G90G00A90.
-
I am getting odd results after posting a 1.25-12 UNJF thread with modified major diameter 1.262/1.252. Is this something new with modified major diameters. Does the X have to be modified? (or leave it for comp.) How does it effect the "H"? (1.250-12 UNJF THREAD) N540 G00 X30. Z80. N550 G97 S500 M03 M42 T0505 N560 G00 X.9598 Z.2233 M08 N570 G71 X1.25 Z-2.1 D.006 H.0902 F.0833 N580 G00 X30. Z80. M05 N590 M02
