Columbo™
-
Posts
719 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Columbo™
-
REMEMBERED Thanks, after a lot of trial and error, I remebered the password and created an off line (disk) file that keeps all passwords readily available. I guess the mind is going a little it just tool 2 days to remember, lol!! Thanks
-
No worky, cannot do a save as. Any help.
-
I agree with CNC Apps Guy, seen this many times, it's just a controller problem and the only fix is to slow it down.
-
No originals, I guess I'll just do a save as..... and delete then password protected ones. I haven't tried it as of yet so I hope that works and does not take the password with it. Thanks
-
Hi all, I have added a password protection to my Machine definition. All programmers use the same files located on the network so password protection is needed. I had a list of passwords on my last PC that has crashed and my IT guys could NOT retrieve any information. Is there a way to remove or reset the password for the machine def. and the control def.? Thanks
-
yer welcome
-
infinate look ahead prevents the toolpath from crossing itself to protect against gouging. Hope this helps
-
try to turn off infinate look ahead on the contour parameters page.
-
Hi all, When crating a note, is there a way to create and save your own symbols? Thanks
-
quote: As I said gages are good. They've been verified Was the tool checked????
-
Crazy millman is right, the go should go first unless the P.D. is bad.
-
Thanks 88Matt, Is there any vid for autosave??
-
How true that is with the cmm/inspection department. two different inspectors two VERY different results.
-
CNC Apps Guy ,,, how do you get the backup.mcx to stick? do you use the auto save, are any boxes checked?????? Thanx
-
there are actually (8) calculators
-
Very nice, thanks
-
thanks guys
-
I used it on V9 where I had it save to a single file. eg. lathe_bakup or mill_backup Can X do that instead of saving hundreds of different versions/stages of the file?
-
What is the best way to use the "AUTOSAVE" FEATURE? I had the autosave feature checked along with "save using active file name" . After months of this I looked into c:mcamxmcx directory and found hundred of duplicate file names using a LOT of memory. example: *@100.MCX *@101.MCX *@102.MCX *@103.MCX . . . . . . . Are there any better options?????? Thanks
-
I have used inserted tools (Kennametal) for rough machining. I have used them also for finishing, but when close tolerance slots were involved I used a high helix mini-cut. YES, it work hardens very easy, keep an eye on the tools.
-
Front view = B0 Right view = B90 Back view = B180 Left view = B270 Could your views be out of sinc.?
-
Make the switch, you will never look back!!
-
Yes thanks got it. cheers
-
Thanks Matt, I understand how the URL codes with internet stuff, but how does it work with linking a file at the FTP site??
-
Thanks Randy, I had a feeling that the canned cycle wasn't working right. I guess that unless it is a simple tool path like rough turning a straight diameter the rough canned is useless. I have noticed with the simple stuff MC canned cycle works, its the multiple steps, etc. where MC has the problem. I remember in V9, you never saw the full canned motion in backplot, you only saw the finish pass. Is it possible to see it that way again????? You never had a collision in previous versions. Again thanks for the help and info.
