Educational file back to Industrial file

[AHarrison1]

I have A file which was accidently saved as an educational file while mucking around with one of the HLE versions.

Is there a way to convert this file back to an 'industrial' file.

This is one of the bosses private projects that gets brought up and then pushed to the back -burner every 6 months or so.

[JParis]

Unless something has changed over the years, not that I am aware...

[MWearne]

HLE cannot, to my knowledge, convert from .mcam to .emcam. I would guess a Save As was done in HLE and the original file exists somewhere...or was manually deleted?

[AHarrison1]

I figured as much, thanks for the input.

[gcode]

any chance you have the Mastercam backup utility turned on??

that has saved me from catastrophe more than once. 

[AMCNitro]

You would have to have a dealer's license...  Get in touch with your dealer, perhaps for one file, once, they would do it.

[AHarrison1]

1 hour ago, gcode said:

any chance you have the Mastercam backup utility turned on??

that has saved me from catastrophe more than once. 

We do, but our backups have a shelf life of 6 months and this project sort of pops up once a year.

 

58 minutes ago, AMCNitro said:

You would have to have a dealer's license...  Get in touch with your dealer, perhaps for one file, once, they would do it.

My dealer is these guys (Inhouse) so if some one from here can give a direction to head towards I would be grateful.

Thanks for the suggestion.

[Eric In-House Solutions]

On 11/14/2023 at 6:47 AM, AHarrison1 said:

I have A file which was accidently saved as an educational file while mucking around with one of the HLE versions.

Is there a way to convert this file back to an 'industrial' file.

This is one of the bosses private projects that gets brought up and then pushed to the back -burner every 6 months or so.

Hi AHarrison1, unfortunately, there is not a way to revert back to the .mcam file, once it has been saved to an .emcam. If you have any more questions regarding this please open a ticket by sending an email to [email protected]

Regards,