5 axis help

[snowman]

Im trying to cut the bottom of a piston on a haas

trunion table. Im holding on to the top of the

piston in a chuck in the b axis.

I would like to come up with a 5 axis finish pass

to finish the cavity of the piston. I am not having any luck at this.

I can not access the ftp site but if somebody would like to look at this I will email to you. Thanks for any help.

[crazy^millman]

May be tonight but you can send it my way and I will see what help I can offer.

 

HTH

[Reece L Gibson]

Send it on, I'll look at it

[snowman]

check your mail guys its on its way

thanks for taking the time to look at this

for me.

[mayday]

send it over Terry, I'll look at it

[snowman]

Its on its way wes. If you would put it on the ftp site for me and post a link.

Thanks

[Slick]

If you're still up for it, I'd love to take a look.

[mayday]

quote:

---

If you would put it on the ftp site for me and post a link.

---

done

 

its in the MCX folder

new-andy3

[Storkman]

quote:

---

send it over Terry, I'll look at it

---

Based on the fact that he will still be able to see straight at the time.