mc9 post

[blazing bobby]

hey dose anybody have a good mori c axis lathe post?

[jeff]

yes

[elbro]

Oh boy

 

You might want to look at the forum rules

 

Rule #1: Don't ask for a Post Processor.

[Henk]

I'm sure some one have

 

look here

[John13]

Your reseller could hook you up.

[Hardmill]

quote:

---

yes

---

Yes

 

READ THE FAQS PLEASE

 

 

PEACE

[mayday]

BB's siggy

 

quote:

---

i can program circles around you...

---

bet not on a mori c axis lathe

[Guest]

why can't the forum be set up so that before you can post a topic or response you are automatically

refered to the forum guidelines and accept those rules.i myself read them first, but obviously a lot of members don't.

[Guest]

quote:

---

bet not on a mori c axis lathe

---

Prolly not without that good post.

[blazing bobby]

will come on guys hook it up...

[Hardmill]

3 posts and you want a freebee, get a life.

 

 

PEACE

[MLS]

I'll trade one for some Pokemon cards.

[blazing bobby]

del can kiss my ashh...

[Mcam Nut]

quote:

---

will come on guys hook it up...

---

Would you care for a lathe program with that?

[blazing bobby]

hardmill... ive got a real job... i dont have time to be chating with you mc geeks all day...

[Mcam Nut]

quote:

---

del can kiss my ashh...

---

looks like you will get banned before you get a post

[Guest]

play nice now.

[Hardmill]

"hey guys Ive contributed nothing, could I have a free post. I probably

wont come in here any more unless I need another handout."

 

:SMACK:

 

PEACE

[John13]

:POPCORN:

[blazing bobby]

mcamnut... you only have lathe level 1... i need a c axis post... you cant program for that...

[Mcam Nut]

Profile for blazing bobby

Member Status: New Member

Member Number: 15297

Registered: 08-16-2006

Posts: 5

Location: ontario

Occupation: master programmer

Interests: programming cool parts

 

 

my guess from the profile would be jr. high

[Hardmill]

quote:

---

hardmill... ive got a real job... i dont have time to be chating with you mc geeks all day...

---

Oh OK, were'nt you askin about that high payin position at

Allied Mechanical, ROFL What a D1CK.

 

 

PEACE

[Guest]

Need a post, sure thing.

 

Send me all the machine requirements, your specialty requirements and don't forget the hourly rate.

 

COD BTW

[Mcam Nut]

quote:

---

you only have lathe level 1... i need a c axis post... you cant program for that...

---

guess u didnt notice the mill level 3 and 5 axis on there did you :DUMBA$$:

 

I do mill turn work fine with what I have

[Hardmill]

quote:

---

Posts: 5

Location: ontario

Occupation: master programmer

Interests: programming cool parts

---

Gee Mr Master Programmer, why dont you make your own post ??

 

PEACE