operation manager problem

[mig]

Hi All

I having problem with selecting operation in operation manager if I want post (select) 2+ operations by holding "shift" .

Anyone else has same problem?

Thank you in advance

[Goldorak]

i select another operation , then reselect those i want to post !!!

[Thad]

What version of MC, mig? Older versions of X used to do that but it was fixed a while ago. I have no problems with it now.

 

Thad

[Thad]

What happens with you do it?

 

Thad

[3R!< W3NG3R]

Yes, I have that problem (and many others with the ops manager). Sometimes it goes away and other times I have to shut MC down and restart.

[Tim Pruett]

here's what I do, move the red arrow into the group that you want to post programs out of, create another program by clicking on any type of program. when the first box comes up to select geometry just hit the x to get out of it. then you can select the programs you want. at least thats how it works for me. hth

[Mark Baker CNC Software]

Mig, are you using Toolpath Groups?

 

I've seen a problem with selecting operations with the "shift" key when some of the toolpath groups are closed (collapsed).

[mig]

Using MCx2mr2 mill level 3

 

------------------------------------------------Mig, are you using Toolpath Groups?

 

I've seen a problem with selecting operations with the "shift" key when some of the toolpath groups are closed (collapsed).

---------------------------------------------------

I am trying to select operations inside tool path group.

Some times it work , some times no.

[Colin Gilchrist]

Mig,

 

You should only use Shift if you want to select a range of operations, say 1-6. If you only want to select two operations, use the CTRL key. It works much better.

[mig]

If it not working , it not working for any range.

If it working.... working for any range also.