Machine Group Properties color change?

[Rob B]

In my MGP the area around my switches are blacked out. If I toggle the switch on I can faintly see the font under the blacked out box. I hope you can understand what the problem is. It has only been this way for a couple of days. I don't know what I have done to get the blacked out areas.

Thanks Rob

[cobra95kev]

Is there any way you could post a screen shot?

[Rob B]

Give me a few minutes.

[Rob B]

I've gor other problems for now. I will upload pic later this afternoon.

Rob

[Rob B]

Let me try the pictures now!!

 

 

 

 

 

Can't figure why the black boxes have started??

[cobra95kev]

I have never seen that before. My first guess would be to try a install repair? Or try to reload your machine def?

 

 

Good Luck,

[Colin Gilchrist]

Try reloading the machine definition and running ram saver...

[Rob B]

Its not only on this file, its every file.

[Teh Bear without Brains kinda idiot]

Delete or move to some other folder (preferable ) file mcamx.config from config folder .

Mastercam will create the new standart one .

Solved me many problems lots of times

HTH

[ATG]

I have the same problem..........

[Guest]

you guys likely have corrupt config files.

 

do as Alex suggested.

 

delete or remove the config files from that folder and restart mastercam to create a new config file.

[Rob B]

I will try this soon. Thanks Rob