X4 Engraving on XP 64bit

[Salahuddin]

I had this problem with X3 and now it continue with X4.

I have Mastercam Installed on XP 64bit Machine

Engraving not work at all,

it give error and close.

every time I move the file to 32bit machine and make the engraving there, but it annoying.

I tried with QC but nothing...

any one have this issue too and did he found a solution for it?

[babolino]

I also tried on my XP 64bit. Doesn´t work at all!

[Guest]

I still get the estamp.exe has stopped working error.

 

I reported this during BETA

 

 

Vista x64

[Chris Bell CNC Software]

John, can you export HKEY_Current_Usersoftwarecnc software, inc.Mastercam X4, zip it up, and send it to QC? Also, zip up your Engrave folder. We've been chasing this one for a while and have never been able to duplicate it.

 

Thanks in advance.

 

Salahuddin, I have been looking into this again since you sent your email last week. No luck so far, but I'll keep trying.

[Guest]

Files Sent Chris

[Salahuddin]

Thank chris

hope you will find a soulution for this soon

[babolino]

Somethinng new about that?

[Chris Bell CNC Software]

Still working on it

 

If you guys can give me any steps to reproduce the problem consistently, please let me know. It works on all of my 64-bit machines. I have only been able to reproduce the error once, and 30 minutes later it was working again.

[Kevin M @In-House Solutions]

Did you found any solutions or workaround?

[Salahuddin]

Chris is still working on it

hope it will be solved soon

[Leandro]

Same problem.

¿any solution?

[Salahuddin]

not yet

[Salahuddin]

Good news

the problem solved

chris sent me a file that solved the problem

Thank you Chris

[Glenn Bouman]

Would you mind sharing that file?

 

I have never gotten engrave to work on any 64 bit computer.

[Todd Tracey from Fastech]

I'd like to get that file as well.

[J Coulston]

I'd like to get that file as well.

[babolino]

Me too please.

[Chris Bell CNC Software]

Hi guys,

 

We just came up with a solution that may solve the Engrave issue on the x64 systems, but it has NOT been thoroughly tested yet. I am not confident in releasing this yet, and Salahuddin and I have been working on this issue for a few years, so I wanted him to have the opportunity to give this a quick test.

 

I will let all of you know when this is ready for release. Thank you for your patience.