CNC PROGRAMMER SEACH FOR JOB

[thanhsonnguyen]

Thanhson Ngoc Nguyen

-----------------------------

 

Home :(408) 938 - 0636

San Jose, CA Cell :(408) 592 - 2507

EMAIL:[email protected]

-------------------------------------------------

 

Obiective: CNC Mill Machinist/Programmer

 

Skill Summary:

- Good people, Easy to work with, Positive attitude

- CNC Vertical Mills, Program operate and setup, 3D -2D, PARTS WITH 2 ANGLE ON 3AXIS VERTICAL

- Set up and operate Manual Mill

- Strong Knowledge of Manual Lathe

- Run IGES,STP,DXF,Solidworks ,CAD file

- Machine Maintenance

- Precision Tolerances, Measurements

- Read Blueprints, Close Tolerances, Drawings, Dimensioning & Tolerances Control

- Computer Software, PC repair ...

- Able to utilize variety of hand tools.

- Hard working and fast- short time machine run

- experience hand to work with company have ISO

 

Over 12 years CNC experience including prototype programming and, machining

Some of the companies supported:

- LOCKHEED- MARTIN, - FLEXTRONICS, KLA TENCOR, TCI, CUTERA, PMC,

- PLANTRONICS, THERMAGE, PROMETRIX, INNOVATIVEIMAGING INC

- OPTIMEDICA CORPORATION, LUMENIS, THEMOQUEST, PHOTONDYNAMICS

- PARAMIT CORPORATION, NEXTEST, CARDINALHEALTH

 

Materials:

Aluminum, Stainless Steel, steel, copper, brass, ceramic, plastic, nylon, pvc plastic

 

 

Work History:

 

2/2010- 3/2010 PTH - Manufacturing INC, San Jose, CA

CNC Machinist

- CNC Mill program/setup operate

- 7Akira Seiki (Mitsubishi Controls)

 

12/1999-12/2009 EURO Manufacturing & Engineering, Morgan Hill, CA

CNC Programmer/Machinist :

- Programmed set up and operated

- Fanuc-vertical Mill 2D AND 3D, PART 2 ANGEL

- 2 Haas vf 2,1 super haas vf 2

- 1 Haas vf 4, 1 Haas vf 3

- Manual lathe and mill

 

9/1998-9/1999 GNK Machine , San Jose, CA

CNC Machinist/ Operator

- CNC Mill setup and operate

- Mills Haas vf3, Akira Seiki

- Manual Lathe

 

5/1997-7/1998 Acer America , San Jose, CA

Mechanical Mechanical Assembler/Expeditor

- Assemble Power cable/supply, CD-rom drive, floppy drive

- Responsible for distribution of motherboards

 

Education:

- 1994-1998 Dai Hoc Mo University, Viet Nam

- 2000 ESL College . Sunnyvale, Ca

- Mastercam v 9.1 and Mastercam X - 2002

- Mastercam-Cad Cam software Inc., X3 - 2008

- Mastercam-Cad Ccam sofware Inc., X4 -2009

 

Familiar with Mastercam v9.1 to X4 MU3

 

Capable of post program and set up:

- Haas, Mazak 680 Mill , Kitamura , Okuma, Akira Seiki (Mitsubishi),

- Heidenhain, Heian Sharnoa Tiger 4, Mitsubishi., Milltronic, Supermax

- Matsuura, Dynamyte 2400, Multicam, Boston Digital, Yasnac, Mazak EIA

- P&W Viking Teammate 6400. Triac, Kearney & Trecker

- Anorad(flame cutter), Linde(plasma cutter)

 

Reference : Available upon request

[thanhsonnguyen]

ANYONE WORK WITH 1099 BEFOR?? IT HAVE PROLEM EDD ,if shop don't have anythink to do??

[Guest CNC Apps Guy 1]

1099 means YOU are TOTALLY responsible for ALL Taxes! Fed, State, SDI, FICA, etc...

 

No insurance, no benefits, NOTHING! No Worker's Comp either usually. You are an independant contractor.

[Jayson Kramer]

And if you clam on EDD then they will subtract from your EDD check.

[thanhsonnguyen]

1099 that good for part time work or ready have pull time rite, thanks you guy

[thanhsonnguyen]

so if i have 1 shop offer working pulltime right now, and i'm get working with an shop pay 1099, the shop 1099 they have prolem later for EDD? if pulltime job no longer working.,so if they subtract on my check onweek i'm have job, if next week nolong work, i'm can clam back edd

[Colin Gilchrist]

Sentences.

 

Please use them.

[chopsley]

With all due respect "Supercar".

 

I think you need a refund from:

 

2000 ESL College . Sunnyvale, Ca

 

Perhaps a free refresher course would do the trick.

 

[thanhsonnguyen]

thanks

[Dave.L]

Give him a break, he obviously speaks another language

[Jayson Kramer]

You can work a full time job and do 1099 work. I was thinking you were talking about getting unemployment when you were talking about EDD.

[thanhsonnguyen]

i'm worry, full time job not work toolong( this time rite now), if i'm have job 1099 and i'm can't get back EDD, because i'm have 2 shop cheat me, when come there make program a week make too many part for them. or maybe they don't have any more prototype , or they have progam ready ,they want setup guy run part.cheap than pay progammer, buxxxx this.. that, and i'm get ....

[Verndog]

quote:

---

,they want setup guy run part.cheap than pay progammer, buxxxx this.. that, and i'm get ....

---

You've got that right.

 

Obviously you are up against a language barrier with most shops out there, and many of those shops are willing to put up with that BECAUSE they think they "can" save a buck. No offence, just the way some people think. It's tough working with people that dont speak english very well, (and some that do)...you tell them you need something dead nuts, and they come back with squirrel food.

[mayday]

quote:

---

they want setup guy run part.cheap than pay progammer, buxxxx this.. that, and i'm get ....

---

you should run for public office.

forget programming.

Kali could use a guy like you

[robh]

"..you tell them you need something dead nuts, and they come back with squirrel food"

LMAO Verndog

[Mick]

I'm curious about your resume where you state:

 

"Capable of post program and set up:

- Haas, Mazak 680 Mill , Kitamura , Okuma, Akira Seiki (Mitsubishi),

- Heidenhain, Heian Sharnoa Tiger 4, Mitsubishi., Milltronic, Supermax

- Matsuura, Dynamyte 2400, Multicam, Boston Digital, Yasnac, Mazak EIA

- P&W Viking Teammate 6400. Triac, Kearney & Trecker

- Anorad(flame cutter), Linde(plasma cutter)"

 

Yet in your experience, a lot of those machines aren't listed.

 

I'm just saying, that if a potential employer was looking at that, the two dont tie up, as the majority of experience listed is with Haas machines, and no Okuma's, Matsuuras, Mazaks etc. Being able to post process for these machines doesn't mean you can programme and set up for them.

 

I'm a Programming Supervisor, and these are the kind of things I look at.

[thanhsonnguyen]

i'm undestand that bussines .... mayday , maybe lastshop i work 1 week tell me rite don't think peole with peole or person too much.,that asian not in united

 

[ 03-04-2010, 06:58 PM: Message edited by: Supercar 2006 ]

[thanhsonnguyen]

[Dave.L]

quote:

---

Being able to post process for these machines doesn't mean you can programme and set up for them.

---

If you understand and can read g-code, then you can move from one machine to another very quick. Sure, each machine has certain codes that others may not and certainly the controls will be different, but an experienced person can adapt very quickly.

[thanhsonnguyen]

i'm buy you pho*~ dave

[chopsley]

No offense Supercar. I believe you have very good skills. I understand English is a tough language to learn. For what it's worth my wife is Asian and I work and deal with lots of hardworking Vietnamese Americans. I am sure you will find a good fitting position at some point. Best of luck.

[iowajim62]

FWIW this fellow is same one who was asking about this a few months back sim error

 

Question/Issue__________________________________________

(Sim) Error message: Invalid SIM found-error code 2, EXE not valid

Cause: Hasp emulator

Answer/solution____________________________________ V9

•

 

 

I would hope everyone here knows what an emulator is used for..........

[thanhsonnguyen]

I'M DONE formax C DRIVE WITH THAT READY, GIVE BACK SIM TO OLD SHOP , THANKS IOWAJIM62

 

[ 03-04-2010, 11:14 PM: Message edited by: Supercar 2006 ]

[thanhsonnguyen]

THANKS chopsley , my last job own he Portland, i'm just say thanks they lets me learn program from there

[gcode]

quote:

---

I would hope everyone here knows what an emulator is used for..........

---

that doesn't neccessarly make anyone a pirate.

 

back in 2002 I took a job at a pretty big shop.

20 VCM's, 4 big HBM's 3 programmers 50 employees blah blah blah.

I was to replace a guy who wasn't getting it done.

They told me they were running V9 at the interview.

First day on the job I found out that meant

1 legit copy of V7 and 6 or 7 copies of V9 crack.

I'm lucky in that my wife has a good job and it was an easy choice to do the right thing.

I walked.

Had I been the sole wage earner with a pack of kids, that would have been a much more difficult

decison..crack software or hungry kids. explain that to a 4 year old.

 

In the early 80's I worked for a guy who'd hire Vietnamese boat people, work em like dogs

and refuse to pay them. Couple of these guys were ex ARVN and very hard guys. It always amazed

me that he never got his throat cut.

 

We're riding super awful hard here.. sure his English needs work, but he's going to school, looking for work and trying a hell of a lot harder than a lot of guys I know, going on their second year of free Obamabucks.. how about we cut the guy some slack.