VMC 3016 FADAL

[cormigu]

Hi guys,

can anyone tell me what kind of post processor that I can use for my Fadal.

I have a trouble with A axis, start a wrong position..

 

THX.

[BW_Hawley]

We got our Fadal post from Allan Jones. Works great but we don't use 4th axis so can't help with that.

[Todd Tracey from Fastech]

Contact your reseller, give them your SIM number and the release of Mastercam you are using.

[shazam/TPP]

i use the mpmaster, free on here. also check your machine def.

[Justin Beebe at Folsom Tool]

Cormigu,

 

Use the mpmaster 4-axis post. It works great on the Fadal if you have your Fadal set to Format 2. The mpmaster post will use fixture offsets G54,G55,G56...etc. On a Fadal G54=E1 G55=E2 and the machine will accept either or. One thing you may need to change are the rotary lock and unlock codes. Many Fanuc machines use M10 to lock and M11 to unlock. Mpmasater will most likely give you those codes unless you edit it. Our Fadal 5-axis uses M61 to unlock and the A-axis and M60 to lock it. If you need help getting your post to spit out the right codes for lock and unlock I can give you a hand.

 

HTH

[Hardmill]

+1 to the MPMaster post

 

 

 

 

 

 

PEACE

[cormigu]

Thanks so much guys...!!!

MPMASTER...IS THE BEST!!! :D