Stock Model

[David Conigliaro CNC Software Inc.]

Colin, in-house did that when sharing desktop.

 

nothing is pointing to an stl.

 

At the moment I am told to export all the geometry, export lavels, export all toolpath groups.

 

start a new file then import , geometry, import levels, then import all my paths, then reselect then regenerate .

 

Do I win any swag for the longest most time consuming work

around to date?...lol <------- have to laugh cuz I have no one to punch....

 

Can I have the file, we've seen this and fixed it awhile ago....

[Thee Rickster ™]

David, support at In_house has sent it in.

 

I gotta get a job job done but I will have Chris from in-house contact you directly.

 

Thanks

 

Cheers

Rick

[MrFish]

David, support at In_house has sent it in.

 

I gotta get a job job done but I will have Chris from in-house contact you directly.

 

Thanks

 

Cheers

Rick

 

 

Rickster check here

 

[/img]

 

have had it change "stock shape" to file and your latest file, a number of times. It even sticks next time you start a new part. very frustrating. if you reload your config it seems to cure the problem for a while !!

[Brian B 74]

So I was playing with Colin's recommendation on stock model tolerances. From the small side of the rough tolerances to the small side of the finishing tolerances my toolpaths were with 30 sec of each other (model 7x7x1.5). I think for the time being I am going to stick with the small side of the semi finishing tolerances (.01 stock, .003 path, and .003 tool).

 

What tolerances are others using?

[Müřlıń®]

What is the difference between taking the old verify and loosening up the tolerances and creating an stl from that NCI to use as a stock model say in x5, and using the stock model feature in X6?

[Geardoman]

@Rickster

 

Did you get any solution on the stock model that was stuck?

 

I have the same problem, the whole stock model is stuck even if I deleting the "stock model operation" and the operation that belong to it...

It is a PITA then I have about 100 op's and the stock model won't disappear