Free 5 axis webimar????

[pip]

I registered I got the email, I set an alarm on my iPhone, and I still managed to miss it.. Ironicly programming a complex 5-axis part.

[Jayson Kramer]

Guys I will check with Derek to see were the link is. We will be doing these Wed Webinars for a while of different topics. we will try and post here when we can.

[Webby]

It'll be posted here on eMastercam once it's ready (with permission).

[Jayson Kramer]

It'll be posted here on eMastercam once it's ready (with permission).

Webby do you want the Video file to post or the link?

[NOTW Programmer]

Will be watching at home this weekend ! Oh Yeah !

[Rotary Ninja]

Working on it guys,need an hour to get it processed, in the meantime.....take a look at Jay's earlier webinar

it pertains to Rotary's question below. Sometimes 5 Axis toolpaths can be used for more efficient 4th Axis output

 

 

 

Rotary, you may be interested in the class we call multi-axis. It teaches rotary 4th axis on a vertical machine, programming for a Horizontal with rotary axis, programming 3+2 on a five axis machine, fixture design for a horizontal machine and CNC lathe Details here, we have several other courses that may be helpful to you, but if I turn this into a commercial I will get kicked off the board

 

That's the one I was thinking of taking. Will look into it. Thanks!

[Webby]

It's now the featured video on eMastercam.tv... just the thumbnails aren't showing up yet.

[Newbeeee™]

Thanks, that's THANKS for posting

[Reko]

Thank you, guys!

 

That was a nice introduction to 5-axis machining/programming.

 

We are going to finally be getting our Ingersoll Gantry Mill up and running within the next few months... a lot of set backs... so I will be looking into some training on 5-axis programming for Mastercam soon, as we also bought the nutating head and plan on using it.

 

Thanks again for the great information.

[Mr. M]

This was a great intro video to the 5-ax world! Thanks for putting this up!