Net Hasp

[gcode]

copy this file

C:\Program Files\mcamx6\nethasp.ini

into your V9 folder

[raymondzz]

Still did not work

[gcode]

double click

C:\Mcam9\nhasp9.exe

and make sure Nethasp and Network are checked then click Read

It should show you all your nethasp modules

[raymondzz]

running nhaspx found netHASP-10 on network but nhasp9 will not found nethasp on network

[gcode]

This sounds like an IT issue.

It works fine here, as long as the computer can see the nethasp server and the

service is not being blocked by the firewall it should work.

This is an x64 machine, but I don't think that makes any difference as far as

running V9 nethasp see the screen shot

[raymondzz]

Ok, keep on trying things

 

Thanks

[raymondzz]

I see why your nethasp9 work is you have a level 3 and I am working with a level 1.

Message is " Error checking out a Mill level 3 License. No active NetHASP license manager was found."

[raymondzz]

any ideas on how start ver 9 for only level 1?

[Chris In-House Solutions]

What about trying to put the IP address of your server or the computer where the nethasp is located in the nethasp.ini file.

 

You should see the line shown below in this file.

;;NH_SERVER_ADDR = <Addr1>, <Addr2>

remove the two semi-colons and then input your address next to the following NH_SERVER_ADDR =

[raymondzz]

nethasp.ini already has correct ip address

NH_SERVER_ADDR = ###.###.###.###

yes removed number for posting

[Allan]

"any ideas on how start ver 9 for only level 1?"

 

Edit the shortcut:

 

c:\mcam9\mill9.exe /M1

 

 

HTH

 

Allan