Rotary Ninja

Mastercam Learning Group

Recommended Posts

Since this is your first post on eMastercam welcome to the forum. And since this is your only post how about this... there is an idler bracket EMCX file in this thread. How about you program that and submit it back here and you will be in the group.

 

There is also a link in this thread to the download for the learning edition of Mastercam.

Share this post


Link to post
Share on other sites

Webby said he went ahead and added you. So welcome aboard!

 

I think from here on anyone wanting in should program the Idler bracket in this thread and submit it. What do you guys think?

Share this post


Link to post
Share on other sites

"I think from here on anyone wanting in should program the Idler bracket in this thread and submit it. What do you guys think?

 

That part is a little tough for the noobs. Any part for a totally new guy can be rough.

Share this post


Link to post
Share on other sites

Ok, we can come up with something easier then. But do you think that would be a good idea?

Share this post


Link to post
Share on other sites

Ok, we can come up with something easier then. But do you think that would be a good idea?

 

Hi Ninja, I sorta get where you are going with this idea, but would like you to confirm. I get that there has been a fair bit of enthusiasm/hype regarding this learning group, and very little after that (myself included) I have only had time to do the idler bracket and I'm still working on the milling for project 2, haven't even looked at the bottle opener yet. I find myself keen, but struggle to come up with time to do it some weeks. So are you thinking that you want people to first share their own programming before having access to everyone else's files? This has some merit, but in this environment I'm not sure I see it as necessary. What is your thinking?

Share this post


Link to post
Share on other sites

To keep from having to bother Webby with requests to be added to the group by people that have never posted here before. The special account settings are intended for people who are going to upload and download files to participate. The reasoning for creating the members only access was so people would be involved. It defeats the purpose to just give everyone access to the files if they don't intend to participate. So if they program one small part it should show that they are willing to at least try. It's not like everyone has to program every part. I am struggling to find time to here lately. But I know eventually I will get back in the swing of things. So this idea to have people program a part to gain access is just a way to ensure the group has members that want to contribute at least a little of their time.

Share this post


Link to post
Share on other sites

Hi I am interested to participate, I work with a lot of machining superfies mainly I have some work done. Where I can share?

Share this post


Link to post
Share on other sites

I am in. I don't post usually. I have time issues also, but work at home most of the night, I would like to devote some time to this group. I have about five years then interrupted by using another package, now working back in Mastercam X6 and X7. I drag my SIM home everyday, don't have solids since we use Inventor at work (this is temporary :)). I have had HLE and X7 installed on my machine at home to help a friend out and never had any problems. Great idea for the group.

Share this post


Link to post
Share on other sites

Alguien en este grupo habla español?

-----------------------------------------------------

Somebody on this grupo speak spanish?

Share this post


Link to post
Share on other sites

I can see the point to both sides. I'm working on the 4th axis portion of the gearbox housing now. I would maybe suggest having that person with the admission request send a file that they have programmed in the past. Also, I'm thinking about programming a mold and posting it for criticism. I'm just going to find something simple off grab cad.

Share this post


Link to post
Share on other sites

Hi All,

 

I would like to shear with you my project #3, but unfortunately I can't do it.

My knowledge of Mastercam is limited to the very basic drawing and simple milling operation. Thanks to Kevin I did some work as you can see in my post "How you approach this". I wonder if some of you guys will tell me little more detailing about, how to do this project and then I maybe I would be able to do it.

Thank you.

Share this post


Link to post
Share on other sites

ME INTERESA Y ME ENTUSIASMA LA IDEA, YO TRABAJO CON EDGECAM Y RHINO, PERO SOLO PROGRAMO CON MASTER Y EDGE EN 3 EJES, MASTER TOY ENTRANDO A TRABAJARLO, ES MUY FASCINATE. :thumbsup: :thumbsup:

Share this post


Link to post
Share on other sites

Welcome to the forum. The files are already posted. Page 10 or 11 of this topic will tell you how to gain access to the educational forum.

  • Like 2

Share this post


Link to post
Share on other sites

I would want to do this if this is still is going on if yall would let me. I can only use my school's MX6 but if there is a way to get an educational copy that would benefit me as well as this learning group. Thanks!

Share this post


Link to post
Share on other sites

Brand new Mastercam user here. Currently taking the Mill Design & Toolpaths MastercamU course online. I have no work experience with Mastercam or Machining besides a Machining certificate class, and have only done what I've learned in the class, but am anxious to learn more and become a solid Programmer. On the Toolpaths section right now, and next is Applications. Definitely want to practice and learn to be able to put all the pieces together faster and more efficient. I would like to become part of this group. Thanks!

Share this post


Link to post
Share on other sites

I'll try to keep up but could not load your file may want to try another way(industrial sims cannot open)

Share this post


Link to post
Share on other sites

I have tried everyway still industrial sims won't open. I understand it will only open with HLE. Can you send it as a different file??

Share this post


Link to post
Share on other sites

Well, it is quite late but this is my project.I hope I can access another project in this forum, anyone help me?

 finish op1

15152565515_e786eb9de1_m.jpg

finish op2

15152159112_297ba23fef_m.jpg

Share this post


Link to post
Share on other sites

I can not upload my program on this site. 

I upload in *.rar file and *.mc file but " Error You aren't permitted to upload this kind of file"

Anyone help me?

Share this post


Link to post
Share on other sites

Hi guys i would like to be part of this. How can i download the parts the someone already programmed. Sorry for my spelling I am from South-Africa. Please help. Even if someone can email me the part with the program. Thank you.

Share this post


Link to post
Share on other sites

Hi ,

 

Please sign me up.

I just bought emastercam art book with mastercam x8 Home Learning Edition installed.

How can I get the art menu show up  on the tool bar?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us