X7 verify - posted G code?

[Newbeeee™]

Not to cause a storm, just wondering if the new verify is working on posted G code?

[rogkick]

Like Vericut or Predator does??

Don't think it can read in posted G-Code, someone can correct me if I am mistaken.

[Chris In-House Solutions]

The new backplot and verify uses the NCI data from Mastercam. The nice thing about the new backplot and verify is you wont see different results between backplot and Verify as in previous version. This is because it now uses the same NCI data.

To "verify" your G-Code you would have to post it and then import it into verification software as you do in Vericut.

[Newbeeee™]

Thank Chris - that's a shame.

[litnin]

The new backplot and verify uses the NCI data from Mastercam. The nice thing about the new backplot and verify is you wont see different results between backplot and Verify as in previous version. This is because it now uses the same NCI data.

To "verify" your G-Code you would have to post it and then import it into verification software as you do in Vericut.

 

Not true. Verify and backplot still show different results!

[Matthew Hajicek - Singularity]

Not true. Verify and backplot still show different results!

 

Please send an example file to QC, I'm sure they'd like to look into that.

[gcode]

Not true. Verify and backplot still show different results!

 

are you running the old Verify or the new Verify

[Tyler Robertson]

Not true. Verify and backplot still show different results!

 

are you talking about both the new backplot and new verify, or are you using new verify and old backplot?

[litnin]

Mastercam classic backplot (old) and the new verify. New backplot and new verify are the same. And when posted, the GCode from the classic bacplot is Right and the new verify is Wrong!!

Mastercam BackplotVerify.doc

[Mark H]

I have not tried the X7 verify, but looking at your file, it appears that "dog-legged" rapids are being used. Is there a setting for that in the new verify?

[gcode]

I have not tried it, but I believe the new Backplot/Verify system respects the Rapid settings in the Control Definition