Fanuc post for doosan vertical

[falcon954xxx]

Anybody have one or can tell me where to get one.Called Mastercam ,they said they will get back to me.LOL

My controller is an OI series.

[CJep]

Just in-case you missed it:

 

 

1. eMastercam.com is not the place to ask for a post processor. If you need post work done, please see this wiki entry.

 

jus sayin'

 

http://www.emastercam.com/board/topic/67968-important-topics-please-read-before-posting/

[falcon954xxx]

Yep i get it.

[PAnderson]

Mastercam has good posts for our vertical MC's. They will get you one. Also, the default Fanuc 3 axis post works well too and also allows you to edit the post the way you like it.

 

Paul Anderson

Applications Engineer

Doosan Machine Tools

[#Rekd™]

We have an In-House post for our Doosan, works great.

[Jayson Kramer]

Mastercam has good posts for our vertical MC's. They will get you one. Also, the default Fanuc 3 axis post works well too and also allows you to edit the post the way you like it.

 

Paul Anderson

Applications Engineer

Doosan Machine Tools

How you doing Paul? We need to get you a V8 license for your Editor. send me an email.

[Greg_J]

I have one too I would share but.....

 

Our post are now encrypted and won't work with other Mastercam licenses.

[PAnderson]

How you doing Paul? We need to get you a V8 license for your Editor. send me an email.

Jayson, please check your PM box.

 

Paul