Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Maybe I'm not understanding the question. Please see attached Mastercam file where I built the base piece in Solidworks, built the block 2 in Solidworks, I then did an assembly in Solidworks by laying block 2 on block 1, edited block 1 in the assembly file by doing an extruded cut, using block 2 and converting the edges. Saved as an Solidworks assembly, and opened in Mastercam.
Block assembly.mcam
Are you talking about the cutting style, verses the forming style? What tool path do you use when programing your knurling? How do you touch off the tool? Can you share a MC file where you did knurling?
Also, thanks for the advice!!!!
I've did some knurling over the years, and it's always been a trial & error method. Any EXPERTS out there? Or, any good resources with feed, speeds, etc. My part is .75 diameter, 304 Stainless steel, with a medium knurl call out over a 1" length. The knurling tool is .315" wide, so I will have to feed it along the part.
I beg to differ with you. I make my fixtures by laying the parts on top of the material and converting entities, and doing the cutting in the assemblies..........And the whole assembly opens fine in Mastercam.
Thanks Colin!!! My old eyes have never noticed that.
By the way, we are still wanting you to come in. We still haven't slowed down enough to have time for you to come in. I hope you and your family are enjoying the move, have a Happy Easter!!
Yesterday when trying to print my set up sheet Mastercam was showing the WRONG screen shot! (See attached). I closed MC twice, same thing each time. I had to do a restart on the computer!!!!!!!!!!!
1st picture is the part I was working on. 2nd picture is the part I was previously working on..............
Anyone else ever have this happen? I'm using MC 2019
master80, what causes it to rapid down to Z-.308 instead of starting at the top? I've never used the surface finish tool path on this type of feature.........
I got help here on the forum 2-3 years ago on doing this. That part only had 1 hole at a 4 degree angle.
This new part has 4 holes at 18 degree angle!!! The attached file has the imported tool path from the previous part. (still needs regenerated). If someone is willing to look at this and give suggestions on what tool paths they would use, (If not the surface finish flowline), I would be very grateful.
ANGLED HOLES.mcam
Can this chamfer be made without surfacing on a 3 axis mill? All ideas appreciated. Or should I tell the customer it's not possible.............
TEST.mcam
Who else has a customer that is a real pain in the arse? Like changes the part after you already have it done! Gives you a print that's different from the solid model!! Makes revision changes, but doesn't list what they changed! AND THEY KEEP WANTING TO KNOW WHY THEIR PARTS ARN'T DONE..............
THIS IS ME RIGHT NOW!
I want to thank everyone for their suggestions. I ended up just typing it out longhand, copy, paste, (see attached NC code), because of time constraints.
When things slow down here I've reached out to Colin Gilchrist to come to our shop and do some post mod's, set up probing in Mastercam, etc. I hope he is still interested in doing this when that time comes.
I only have 15 of these parts to run, and everything looks good!
LONG HOLE DRILLING.NC
I need to drill some long holes (.256" diameter by 4.11" deep ), in aluminum, using a thru coolant 15 X solid carbide thru coolant drill. The recommend feeds and speed are 300 SFM, .004 IPR.
Here is my problem... It's been recommended that I use a chip break cycle (G73), and that a do a pilot hole 1st. How do I code this to feed down into the pilot hole at a slower RPM, ramp up the RPM's, etc...............
This is on a Haas mill. I'm using the generic Haas post. Is there a switch in the post to use custom drill cycles, and would I have to "make up a custom drill cycle"???
Go to (Computer-OS (C drive)-Program files Mcam 2018- common-editors CIMCOEDIT
Right click on CIMCOedit, and click on send to, desktop (create shortcut).
Thanks!! That is nice to know! I still don't know how it drew it on the screen, because I've NEVER used it before.
I just deleted the lines, and I'm continuing with my "mission"
Merry Christmas!!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.