Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
i had a programmer come to me saying he got an error message saying something about a merged nci on a part he was working on. he had alot of work into it. he thought someone was messing with his file, and said he would have to start over. is there anyway to "unmerge it"?
quote:
My opinion, don't used canned cycles, you will be better off for it in Soooo many waysCould you give me some specific examples?
I used canned cycles for roughing 99% of the time. It is much easier to modify a depth of cut of stock to leave when doing it this way.
In my opinion, if it is drawn and programmed correctly, and your post is set up correctly, canned cycles are the way to go.
quote:
When turning the OD of a solid how do I limit the length of a chain so as not to hit the chuck?To limit the length of the chain, you could always just break the line. I usually just draw a vertical line where I want to end the chain.
this is what I do
assuming you are using x2
click the planes button at the bottom of the screen.
then click lathe diameter +D+Z(WCS)
the bottom of the graphics view should say:
gview:top wcs:top cplane:+d+z[top]
now, the z axis will be along the center of the part
when you draw your dia's (horizontal lines), you input the x dim. as a dia. value, but it is displayed as only half of that distance from the center of the part.
so, if you're drawing a 2" dia. it will be displayed as only 1" from the z axis.
does that make sense?
i'm not the best at explaining things.
hope i didn't totally confuse you.
I sometimes part off from the id with a groove bar. the bar will actually catch the part. It takes some manual editing, but it beats having the part fly around in the machine. I've been doing this alot more lately.
i don't have solids. but i can import them. (as a solid)
can't edit, translate, or run toolpaths.
basically use them just for visual reference. like in verify.
What version?
If you are using X2 you can click the question mark at the bottom of the rotary axis window. This will tell you what each of the parameters does. You can also click the field definitions tab in the help window to give you a definition of each option.
This goes for just about any window in X2.
HTH
assuming this is for a vertical mill with a rotary axis about the x. if you are drilling holes, use the top plane for the wcs, tool plane, and const. plane, and select all the points. check the rotary axis box and select rotary axis postitioning and rotate about the x axis.
if you are contouring. then create a new operation for each index position. using top as the wcs and the created plane as the tool plane and the construction plane. i do not use the rotary axis option for contouring. make sure it is checked off.
I'm not sure this is the right way to do it either. but it works.
HTH
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.