greenxman
-
Posts
137 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by greenxman
-
thank you
-
hello, anyone have a problem with logging into 2023 from home remotely? I get an error no hasp found. the pc is on before I leave, and the little red light is on the hasp. thanks
-
i just went over to download 2024 and there are 5 patches for it already why? It does not make me want to load it. what is going on?
-
has anyone found it better to use a small dia. end mill instead of the old thought process go with the biggest first. already did the job once using a 1/2 bull mill .03r in 17-4, works well but after a lot of parts the tool chips. no i cannot show you the part. it is not very big 1/4 x 3/4 x 3 looks like a connecting rod
-
good afternoon, so just installed 2022 and the F9 is not working right. is that a video card problem? not big enough. i have not done anything really just started working my way around.
-
okay thanks that is what i thought figured i would ask anyway.
-
I am going to be updating to 2021 and in the paste I was shown to do a fresh install every time. Is the update button in backstage a better way to do it?
-
That is what I bought, what i am looking for is how do i get the tests and prints without the disc anymore?
-
good afternoon, so i have in the passed bought the teacher books. it came with a disc to download the tests and prints what not. how do i get this info know 2021 has no disc and the paper work is not clear to me how to get it. thanks for the input.
-
Compensation Poll - Take the poll
greenxman replied to Matthew Hajicek - Singularity's topic in Industrial Forum
I asked this before and again , once you have this poll what is it's purpose ? -
I don't know what topic to put this in. so has anyone have an air makeup unit in the shop? it brings in fresh air and preheats or cools it with the bad air as it get blown out. (has vent pipes in and out with fans) the two airs don't mix. or do you use a mist-buster type unit? hanging from the ceiling. everyone says there is the best of course. thanks for any input.
-
okay i guess i have no clue how the drive around this site. so i go to posts and it says fill out the form what form? there is nothing there . can someone from cnc solution answer this? i would also like a straight answer why is it so difficult to get a post from cnc solution through the dealer?
-
Has anyone had a problem with the trunnion physically getting locked up? haas has come and looked at it something is wrong inside of it and was just asking if we are the only lucky ones this has happened to. i am not looking for a haas bash or anything on that nature. the mechanic covers all of new England area and has never seen this and he is not a new guy. thank for any input
-
Oh great i see it still the same old thing
-
if this is already started i could not find it. so if you call up any mmd and load it in the op manager , then open to edit a mmd button the tool path icon goes away and when you close the mmd editor it is gone. so now you can not do any tool pathing. the only way to get it back is to restart mcx. this does not happen in 2017 what is going on?
-
is this a beta version of 2019 ? if not is there one or is it already released ( i live under a rock and know nothing)
-
this is the only card and plug in it. and yes it has the cable for it (fat white plug forgot the name)
-
yes i did turn up the precision and its the same. the only thing with the graphics there is no performance button?
-
okay i hope this is in the right place. what causes this choppy video in the verify? below is the pc spec thanks for the input
-
100k Machine could not hold tolerance So
greenxman replied to RaiderX's topic in Machining, Tools, Cutting & Probing
to fix your fadal or tell the owner you need to have it laser calibrated. it will cost some money but nothing is free. it can hold tolerance if it taken care of -
i do not think x4 will run on window 10 correctly
-
we have the cnc system one and is all set right out of the box no tweaks ,plus read this topic that was already started good info in here.
-
I don't know, i was assuming it is 17 but i guess it could be 18. like i said i did this before registering the dll but i had it get knocked out some how on a different pc. we have 12 pcs and keeping up is not alway easy. then i forgot how to do it thanks for the help remembering guys
-
so the file get parrasolid error not found. is this one that is fixed by deleting the file in the register and let it rebuild it self. i can never remember this one . i did a search but came up with nothing , i know i asked this before even look in my stream, nothing. maybe an admen can make a folder with these fix in it , so we don't have to keep asking just a thought.
