Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I already do that, and it works well. The problem I am having is that a customer of ours would like to color code certain faces of a solid to depict which areas are functional without having to make a formal drawing or going thru a lengty phone conversation. He can do this in solidworks, but I am not able to bring it in to Mcam, and my boss is too cheap to buy me a seat of solidworks just for color coding. Thanks for the reply though Allen.
Is there any settings in Mcam to bring in the colors from solidworks? I guess solidworks can have different colors on different faces of a solid, but it looks like they get lost bringing them in to Mcam. If it is possible to retain the colors I would love to know how, and if it isn't could you Product development guys toss that in to X. Thanks alot
Dave
I unfortunately installed the service pack this morning, right before I checked the message board. A very bone-headed move i admit, and so now I am getting a g56 work offset where there was a g54 in the same program this morning.
I came very close to bouncing the head of our 5-axis off the part. Lucky for me I keep a change of shorts here for just such occasions.
I am pretty sure that this is a bug. Please let me know if anyone else is seeing this problem, or anything similar.
Thanks
Dave
Anyone have any luck getting mastercam to output a consistant feed rate for a tap? For instance my control takes the pitch as the feed rate, a 1/4-20 tap would run at 250 rpm, but the feed needs to be .05 Any help would be wonderful, thanks in advance
I have and continue to use iscar shrink fit extensions. They have a ER32 on one end so they will go strait into a collect chuck. With a good quality collect chuck i get .0001 runout regularly. They are very inexpensive, less than 100$ and i skipped the heating unit and just use a map gas torch, no problems at all yet. just my .02
Here's my .02, I've had good luck hard milling A2, depending on the rockwell. If its going to be in the low 50 rc range, I would suggest leaving .008 - .01 for finishing, and cut it dry. Get some air on the tool if possible, and use a cutter that is made for hard milling, Hanita and Niagra have some good tools, that do great in hard materials. good luck
We have Ideas here, but they are going away for sure, I think they said it will take a year or so, but Ideas will be gone. It would seem to be a waste of training to learn Ideas when It will be replaced by UG. Just my .002
I have worked with T1 in the past and it is a lot friendlier to machine if you can have it sub-annealed first. It seems to mill ok after that, but you still will probably have to run any drills or reamers very slow, around 30 or so sfm, from what I remember. Hope that helps a little
Hello rwerden,
We just got a 5 axis machining center not too long ago and would be happy to quote machining some props for you. Another company close to us bought the exact same machine to make custom hydro-plane props, they are having great success with them. We would need a model and your requirements as far as surface finish and tolerance to give you a decent quote. Hope we can help
Dave
Marc, You're a genius, my machine will do that, "vari-axis 630" and that is a great solution for the problem. Thank you all for your help, hopefully one day I can repay the favor.
I am not picky about the tools, I would be willing to change to anything that will work. I did not want to use a ball endmill though, I was looking to use a sharp cornered endmill and use the side of the tool to cut the cone in a 5 axis swarf move. This is a new customer to us, and I didnt want to put any radii on the part that werent on the model.
I was able to get it to check the floor the same way as you Marc, the only problem with that is when it doesnt gouge the floor, it leaves material around the side of the cone. I appreaciate your help though, any other ideas are much appreaciated.
Hello all, I am having a very difficult time getting a tool to follow a surface while gouge checking the floor. I was able to play with the settings in 5axswarf to make the tool not gouge the floor but then it does not clean up the surface that I'm trying to cut. Then I tried to get 5ax-curve to do it, and I frequently lock up my system in that toolpath, it never gets done calculating and has to be closed down by task manager. I uploaded the file to ftp://mastercam:[email protected]/Ma...orum/MC9_files/, I hope thats the right spot for it, as I am very new to the forum. Thanks in advance for any help
Hey ed, I would like to take a look at your resume if you are sending it around. We are not looking to hire anyone next week, but we have been quoting quite a bit of work recently, and things can change fast as I'm sure you know. Have a nice day everyone
[email protected]
Me too, Me too, I program 5x, but am new to mastercam, so I am reluctant to complain about things in Mastercam that I do not yet fully understand. But that being said, I have already found a few pretty serious bugs that my local reseller passed on to CNC
Sure, If I get the chance to make one, I'll put it on the ftp, as long as my boss doesn't care. We will probably mod the globe to put our logo on it or something like that, a little something to give away to our customers.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.