Hi JIw, Thank you for the reply. It is polar coordinate output. I will run the codes on the machine and post the results. Thank you.

Hi, I downloaded the 2019 Generic Haas ST 4X MT_Lathe post from MaterCam website ( Tech exchange). I'm cutting a face contour. when I activate the Misc. Integer 4, my X values comes out way too small even negative X values. How can I fix this? I attached a sample file. Thank you, ST20 Test.mcam

Thank you Colin. I will send you a Zip2go file Monday Morning.

Hi all, I'm modifying an older mpmaster post but somehow I cannot get my feed rate output correctly. The post outputs F999999. O0000 (MAF Test) (PROGRAM - MAF Test.NC) (DATE - MAY-05-2018) (TIME - 12:59 PM) (T1 - 1/2 FLAT ENDMILL - H1 - D1 - D0.5000") N1 G0 G17 G20 G40 G80 G90 N2 (POST TEST) N3 (LOAD TOOL - T1 ) N4 ( T1 - 1/2 FLAT ENDMILL - H1 - D1 - D0.5000 ) N5 G0 G17 G90 G54 B0. S5000 M3 N6 X-3.2642 Y-5.1448 N7 G43 H1 W2. N8 W.2 N9 G94 G1 W0. F999999. --------------Here N10 X-2.7642 Thank you for any help.

Colin, Sorry to hear that I hope she gets well soon.

Can you show us the User preference Post Setup Switches section of your post?

I bought the post from Postability but working with DMG is a totally different story. The post is not outputting the correct codes. I have to tell them what needs to be changed. I do not get any help from DMG. I'm not worry about ultrasonic part of yet. Thank you for your help.

I found this on youtube, I contacted him to get some help. He seams very knowledgeable and the good part is, he knows MasterCam.

Thank you for your help. If I send you a programmed sample file, are you willing to output some G-Codes?

It is a postability post.

Hopefully one of those 700 machines out there runs by MasterCam. I'm not worry about Ultrasonic part of it now. Just trying to get the 5axis stuff to work. 3+2, 5axis drilling, and simultaneous 5axis. SUPA CYCLE800 CYCLE832 Thanks,

Trust me you do not want to deal with DMG.

Hi, I'm trying to troubleshoot our purchased post for our DMG Ultrasonic 20 linear 5Axis machine. I'm not getting much of help from DMG and I'm not familiar with Siemens 840D control. Does anyone here have this machine in their shop that he is willing to share some G-Code sample? I can provide a programmed sample part. Thank you.

Download the latest version of Generic Haas ST 4X MT_Lathe.pst from CNC software and it will output P instead of S for live tooling.

Try this settings. # 5 Axis Rotary Settings # -------------------------------------------------------------------------- #Assign axis address str_pri_axis : "C" str_sec_axis : "B" str_dum_axis : "A"

Change the sign of rotdir1to + or -. rotdir1$ = -vecy #Direction This is for your primary axis Secondary axis is rotdir2$

You need to have the .pst and .psb file inside the post folder.

You need to change your post. Try these settings. #Primary axis angle description (in machine base terms) #With nutating (mtype 3-5) the nutating axis must be the XY plane rotaxis1$ = vecx #Zero rotdir1$ = vecy #Direction #Secondary axis angle description (in machine base terms) #With nutating (mtype 3-5) the nutating axis and this plane normal #are aligned to calculate the secondary angle rotaxis2$ = vecz #Zero rotdir2$ = -vecx #Direction

Thank you very much Alex and JParis for the help. Sorry my bad, I was outputting from wrong post.

Attached is a zip-2-go file. Test Part.ZIP

Thank you for testing. But somehow it is not working here. I'm using metric machine definition which should not effect the output I think. I will test with different posts to see the results.

That was the first think I changed. It did not change anything.

Hi, How can I output all my values in radius instead of diameter? I need to output some G-codes for our grinder. I’m using Generic Haas 4x MT Lathe post. Thank you.

Thank you Colin. We are going to run it on Vericut. I will let them know.

Hi, We just bought a Mitsui Seiki Vertex55II 5axis machine with a Fanuc 31i M control. I am trying to find out which type TCP should I use for this machine so I can dial in my post.(Type 1 G43.4 A,B,C ) or (Type 2 G43.5 I,J,K ). I asked the application engineer but he said you can use either one. Does anyone have this machine? Thank you.