Can someone tell me what i need to change in my Haas post to get the manual op to output correctly as either code - no brackets, or comment - with brackets depending on the radio button I have selected. Currently with the following post code i just get everything in brackets as a comment. -------------------------------------------------------------------------- # Tool Comment / Manual Entry Section # -------------------------------------------------------------------------- ptoolcomment #Comment for tool tnote = t$ toffnote = tloffno$ tlngnote = tlngno$ "(", pstrtool, ")", e$ "(", *tnote, *toffnote, *tlngnote, *tldia$, ")", e$ pstrtool #Comment for tool if strtool$ <> sblank, [ strtool$ = ucase(strtool$) *strtool$, " " ] pcomment$ #Comment from manual entry (must call pcomment2 if booleans) pcomment2 pcomment2 #Comment from manual entry scomm$ = ucase (scomm$) if gcode$ = 1007, "(", scomm$, ")" else, "(", scomm$, ")", e$ # -------------------------------------------------------------------------- # Start of File and Toolchange Setup # -------------------------------------------------------------------------- psof0$ #Start of file for tool zero psof$ output looks like this N2410 G1 G40 Y28.069 N2420 Z-7. F2000. N2430 G0 Z26. ( M01 (MEASURE TO SET CUTTER OFFSET) ) ( M03 ) ( FINISH BACK ANGLED FACE ) N2440 A350. N2450 X7. Y26.52 N2460 Z13. was set to code in operation, so should not have the brackets at start and end of the M01 and M03 lines. Next line is the following operation comment, so should be there.

lol

Be careful using coolant, nylon can swell in water !!

Thanks for the indepth instructions Colin. Maybe with machines getting alot faster these days this should be updated to a higher default, or better still have it linked to the machine def for the max possible feedrate, but could still be set lower in the default file - just an idea.

yay, bring on X7

Thanks Mike . I have sent to QC as well, Will let you know how I get on.

he must be quite at work - Thanks for checking Mike.

Anyone know why i cant change the Dynamic mill back feed rate default to anything more than 12500mm/min feed rate when setting operation defaults in X6 ?

how about a flowline toolpath , works a treat on fillets, just edit the flowline data to get it to cut the way you want, i.e top to bottom, climb or conventional etc.

yes a right PIA, I just do as you do and answer No. But is very annoying when you are programming tight 5 axis work that really needs collision checking to be accurate.

Works great for me

Anybody ever find out how to fix this, or is it a bug as I'm getting it now in X6.

Was part dependant, lots of different wcs and translate by toolplane toolpaths, simpler parts opening fine.

Scrub that, it is to do with when you select it to be an stl file in the save as type drop down. If you change the name then select the drop down it works. Other way around and it doesn't , as if it is losing the .stl format when I change the file name even though it is not visible.

Interesting, If I isolate the part on a sperate level and make it the only thing visible then it works fine, but if there is other geometery on the screen it doesn't . I also use this all the time and have never seen that before, will do some more testing before I send to QC. Thanks

Is a complex part so may be having some bearing on it, will do some more testing on simpler parts

If I use save some and select a solid model in my current part file then try to save it as a .stl file , it does not work and just saves a X6 file. Going to send this to QC but thought I would share as well. p.s. work around is to save the solid then open it then resave as a.stl a bit more long winded and a pain having to close files etc but works

DJ not sure exactly where your looking but are probably for machine simulation models.

X6mu1 view manager slow to open, anyone else feeling this ?

Thanks Colin, that is what I suspected.

Can anyone tell me if it is possible and if so how to use Rotary Axis Control when using a Tilted tool plane. I am trying to cut a round angled groove in a plate on a 5 axis machine that cannot traverse to the other side of the pallet so effectively have to mill turn it. I have tested in X5 and X6mu1 and only works with TOP TOP TOP planes, so I guess I have answered my own question but just want to make sure I'm not missing something ?

Brian I complained about this face to face with Mike Rosa recently and he was going to look into it for me but haven't heard anything as yet. I really miss this and the favorites bar also.

Hi Peon Worked a treat Thanks. And they have even fixed the posting ask/overwrite bug in the Mastercan X style file app that was forcing me to use the windows style file app.

I can't get the holder library to open inside a toolpath on the holder page ? Is anyone else seeing this ?

Does anyone have a copy of the subject machine sim models that they might share ? Thanks