I would like to know as well. Good question.

Same here.

Sorry for the late reply. I have not been on here in a while. Upgraded from 2021.

Thanks for the reply. Bummer on the lock down. Hope you make it through alright.

Such as?

Yes, if you follow the link there are files available for download. I did not see .stp files though. They would probably send you files you need if you ask them. I've done it in the past,. Good luck. I don't know if this is okay to post. I didn't think of it. Sorry if I broke any rules. I will accept my lashes and move on.

It's not the exact one but maybe you could manipulate it into what you need. Hope this helps. 5ML1540-41CM1759107 7-20-21.zip

I installed the new release of Masterecam 2022 yesterday and the tool manager is giving me all kinds of grief. First off I noticed the top window,(tools in my PART library), were only showing thread mills. So I opened the filter and thread mills were the only item selected. As I turned on more of the filtered tools my part library populated accordingly. I'm not an expert but I do not recall this happening in earlier versions. The filtering only affected the bottom window,(tool library). Am I missing something here? Today I opened my part file went into the tool manager and EVERY time I unselect filtered tools it crashes. EVERY time. I tried this with a couple different 2022 part files and the same thing is happening. Can anyone shed some light on what may be happening? I really need to move forward with my project. I tried calling my reseller but they were not in the office yet. UGH!!

Thank you all for the replies. I do agree that if the pitch is not called out on a metric thread it shall be a course pitch. If other than course is required it shall be called out with the intended pitch. I was told by my QA department, (after I had programmed the threads in question), that if a metric thread does not call out the pitch it shall be "1. (across the board)". Whaaaat? I tried to explain otherwise to no avail. So, I did reach out to the customer, (QA was afraid to do it), and they returned with, " no pitch call out designates course pitch and sent a clip of a course pitch chart similar to the one I showed QA. Hens, 1.5, 1. and 1.75. If there is something that we all agree to disagree on yes, ask the customer. But I was correct this time. Okay, so maybe I just wanted vindication. Thanks again everyone!!!!!

Thank you. That is my understanding as well.

Greetings, Lets say you have a blueprint that calls out a M10-6h thread. What pitch would this be? How do you know this? Okay what about M6-6h, M12-6h? There is a reason for my questions. I shall share after I get some feedback. Thank you in advance for sharing your knowledge.

Very cool. I put those in my archive file for later use. Thank you for spreading the knowledge around. It is greatly appreciated.

So I figured out how to unroll geometry I placed on the solid but when I unroll it, it doesn't match the geo on level 2. It has a very similar shape but much more narrow.

Thanks for the share. I'd like to know how that's done as well. ??

I program marking requirements for a customer on 80% of the parts we manufacture for them including sequential serial numbers on some. I had been using the Mastercam Stick font, working in Drafting, Notes. I chose this not knowing any better at the time. It allowed me to have more control over the font attributes, (size, aspect ratio, character spacing, angle and plotted locations etc.) in the Properties page compared to Wireframe, Create Letters. Well in 2021 that changed. The Stick type font was not the same as I was using. I no longer have the attributes dialog box in Drafting Notes, Properties to make adjustments in. That was until this morning. I'm sorry if this is already known here, but I did not know this and neither did my reseller. I found that the attributes dialog has also been in the in the Wireframe, Create Letters Advanced tab. "Note Text", (Duh). I honestly never even looked at his. Oh and I no longer need to use the "Break Into Lines" button to convert to geometry for tool paths using the Wireframe, Create Letters. I wish I would have found this before beginning to convert the thousands of characters and lines of text to a different font style all together. Fortunately, it has only been several parts that I have modified. Now I can easily revert back. Again, my apologies if I am the last one to find this out, I'm still learning. Don't bash on me too bad. I just wanted to share in case anyone else was wondering like my reseller and I were. Good day,

I watched some of the webinars in the CamInstructors Big Event. Thanks to everybody that was involved with putting this together. I hope they do it again. Ron, thanks for your segment. Quite informative.

I'm not sure if this is what you are looking to do but what I do in 2d Contour is, select the Enter on first depth cut only and the Exit on last depth cut in the Lead in Lead out page. Then on the Multi pass page check Multi Passes, in the Rough, enter 1 in the number box and 0.0 in the Spacing box. Do the same in the Finishing and I get a spring pass. This does appear to work in Ramp as well. Sorry again if I am mistaken on what you are looking for.

That makes sense. Thanks again for the words of wisdom.

Greetings, I paid for and completed the Mastercam University Multi Axis Course recently. Upon completion there was no "Graded" exam like the previous 4 courses that I paid for and completed. I know during the ugly things that are happening in the world Mastercam is offering their MastercamU courses for free, which I think is amazing. These courses, I believe, offer a "Certificate of Completion" when you finish not a "Graded" certificate. Does anyone know if this is the reason why I was not offered the graded exam at the end of my Multi Axis Course? Or, does the Multi Axis course not offer the graded exam? My employer looks at the graded exams as a measure of learning, 80% or better on a exam is sometimes rewarded. I would like to be able explain why I don't have a graded certificate as proof of my accomplishment. Thanks in advance for any input.

Greetings, Anyone out there have experience machining GPO-3 Fiberglass? The owner is quoting a job and I'm curious about machinability and any human hazards.

I remember declining that when I started running 2021. Could it have been turned on in the background?

Well I tried turning off the event logging and that didn't help. I don't know where or what the Share Experiences is so I have not tried that. I will try moving the network folder to the local machine and see if that helps. Hey, thanks for the help!!

Thanks for looking. I just opened a new file drew a single line and analyzed the distance. Same thing. I selected the 1st end, lag 2-3 seconds then the window pops up allowing me to select the 2nd end point. I am working on the host machine with a network license

Hi, I am noticing that when I click on a item to open/activate it, example being Analyze Distance or something that needs to be chained, it takes several seconds for that window to pop up. It seems slow and very annoying. I never noticed this before and am wondering if it could be a computer issue. I don't know much about computer speeds and settings so if anyone has any ideas of what may be happening here I would welcome any support. Here is what I found on my system: I have no idea what a lot of this means, Windows 10 Pro Intel Xeon Bronze 3104 [email protected] 1.70GHz Memory: 32.0GB (31.7 GB usable) 64-bit Operating System, x64 based processor Nvidia K5000 graphics

Nice. Thanks again.