ROB
-
Posts
167 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by ROB
-
honestly, i never let mc calculate my speeds and feeds,i calculate my own because you got to keep in mind type of mat. tickness of mat. type of holder,type of cutter,type of fixture holding the part etc...
-
try this hope it helps! www.ddtool.com
-
that's it perfect, i got it! thanks once again guy's. that's exactly what i needed
-
well, i try it and the stl icon doesn't work , am i missing something?
-
thank's i will try that .
-
how do i save a operation in verify, i know there is a way, i don't know how to do it i want to go to verify and check my last op without having to run all the ops, i have like 6 different ops to run ,running v8.1 mill hope i explain my self. is it stl and how do you use it? thanks in advance any help will be apreciated.
-
i do my engraving and phono finish at 3,500 maximun rpm on the horizontal matsuura and cincinati milacron and works fine ,i mean slower than the haas vf6 that runs at 10,000 rpm but does the job.
-
thanks i will try that
-
it does'nt open it says incompatible version numbers. run mc9 converter
-
can some body help me on how to open a ge3 file in mc9? thanks .
-
can i also have a copy of wcs, i will apreciate it thanks
-
i've had the same problem with ver.9 using c/comp left in control luckly i did't scrap my parts i reported to mastercam and send my file to be checked they found a bug, and so far i haven't seen any fix for it,so i went back to use ver 8.1 we do a lot of contouring and pockets and can't aford to risk a scrap part.
-
modify break many pieces select arc or line num seg seg lenght hope this helps
-
if you want to do it at the control press, edit,press f1 and select -remove line numbers- and it will remove all the n-#'s
-
I run a vf3 and vf6 very nice and easy to program, and love the editor do a lot of mdi pograming for 2d parts, once in a while use a 4th axis
-
what type of machine are you running?
-
where is the engraving package for mastercam? is it on the installation disc or is a c-hook? thank's....
-
divide by 25.4 or multiply by .03937
-
i put a chart of feeds and speeds on the ftp text & post folder the name is table of feeds and speeds hope it helps
-
i respect every body's opinion but to me i think soccer is the #1 sport in the world ,i've played it for many years and it can be excited even if you don't see any scoring, maybe it has to do if you ever play it before. love the game that's all i can say,but, that's my opinion
-
use modify trim 3 entities select uper and lower lines and the arc and delete the vertical line
-
leadin/out check- entry exit select perpendicular- entry exit lenght=size of circle minus dia of cutter divide by 2- entry exit ramp 0 -entry exit radius=size of circle minus dia of cutter divide by 2 -entry exit sweep 0 helix 0 should start at center and finish at center with c/comp on try it...
-
pregunta... tu libro manual de mastercam mill esta en ingles? si puedes poner un ejemplo dibujo en el ftp site has copy/paste. o hasme e-mail..... [email protected]
-
Hola: me llamo Roberto. yo hablo espanol, que maquinas operan alla? que tipo de partes producen? alguna cosa que te pueda ayudar hasme saber...
-
thank's i'll give it a try!