Oppiz, Stop it your bringing up bad thoughts. I have been working on my house for about 3years now.

Yes, I believe version 200 will be out soon.

+1000 For time and money go/no go is the way to go. But if you already have a cmm in place than that would be the ticket.

Also you can use your r and s keys on your keyboard, its alot nicer than clicking a hundred times with the mouse.

You can always convert the file into something else. Instead of read choose write and create the file you want or need.

Create a bound box, in 3d create a line from side to side and top to bottom on both ends (of the bound box), then create a line from intersection of both ends. That will give you a center line through your part. If you want that to be zero then translate all entities, between points, midpoints,origin. Is this what your looking for?

Have you analyzed the surface yet?

Actually, Sandpaper around 80 grit works wonders on nylon, at least 33% glass filled nylon.

mine as well.

Catia is just a cad software not a cam right?

Brown can posibly add a Olypic Gold title to his list this summer

Here as well

Nice Nice!!! I dont here any cali people talking. Oh I know its not the Pistons that are beating L.A. its L.A. beating L.A.

I should say I am just a receipient who is passing it on. I knew there were some here who could relate and some who would enjoy it. I myself am a former M.P. in the Army although I did have a gunny ssgt as an instructor in S.R.T. school.