snowman
-
Posts
66 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by snowman
-
sorry dude I havent had any formal training so cant help you there. Ill find out if its worth my time in march though.
-
take a look at this maybe it will help. training Im taking mine in march so cant tell you anything about it.
-
this has been covered before check this out wire
-
you can also preselect and right click on levels tab and the change levels window will pop up.
-
if its like our prototrak mills the post outputs in gcode put it on a floppy with extension .cam the control converts it to events when you load it. our two axys mills need floppy formatted at 750 meg hope this helps
-
is what i try doing is before i do any toolpathing go into wcs view manager and set up my work offset numbers in the views ill be using and it will put them in for you. 0=g54 1=g55 and so on
-
Its on its way wes. If you would put it on the ftp site for me and post a link. Thanks
-
check your mail guys its on its way thanks for taking the time to look at this for me.
-
Im trying to cut the bottom of a piston on a haas trunion table. Im holding on to the top of the piston in a chuck in the b axis. I would like to come up with a 5 axis finish pass to finish the cavity of the piston. I am not having any luck at this. I can not access the ftp site but if somebody would like to look at this I will email to you. Thanks for any help.
-
Trying to rush through stuff before xmas weve got that week off. Your roller cabinet, sorry dude sold that on ebay. Got a 12 pack of daddy light for it.
-
I havent updated to 3 yet geuss im still gun shy from the last time I tried it. Hey mayday hows It going give me a ring sometime I still need to stop over and drink with, I mean see you.
-
Got it thanks john.
-
Could someone send it my to pleeeaaaase?
-
im not positive if this is your problem but i would start by looking in your machine definition manager under edit general machine parameters coolant commands maybe this will help and welcome to the forum
-
kevcam, if you want you can still use cimco in x
-
it just keeps getting better thanks thad
-
got it thanks guys!
-
how do you create new toolpath groups in the op manager. when i right click and go into groups its greyed out. i can create new machine groups but thats not what i want. i like to do different opps in one file. and create a new toolpath group for each one and name it opp-1 opp-2 etc.
-
quote: who you trying to fool?? unless you have changed since ive been there, there was no such thing as too much i will never change, if your good at something you mines well stick with it. until i get your age ofcourse
-
quote: Also make sure 'linerize helixes' is UNCHECKED in the ramp contour dialog... monday suck! i overlooked that one. to much to drink this weekend. thanks pshyco mill
-
i am trying to helical mill a hole with contour ramp. i can not get it to output arcs with z moves. i have tried alot of things with no luck i have filter checked, in my control def and post ive checked support helix in all planes, my geometry is a arc not a spline ive tried different posts they all do this. i could get this to work in 9 and all my posts have been updated to x using update chook. thanks for any help [ 10-17-2005, 09:37 AM: Message edited by: snowman ]
-
quote: Definatly a strange one. it seems to be that way with me alot. appreciate the help.
-
hey thanks there on there way.
-
no errors
-
afer updating my v9 post to x using the update c-hook im having problems with it not putting in my hole positions with drilling cycles. it will put in the first location and drop the rest. tapping cycle works just fine. this is a heid_430.pst ive never done any post editing before so any help would be very much appreciated.