mig
-
Posts
852 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by mig
-
Is it possible to set mastercam verify in the way when tool simulates from the top plane and part is rotates as in real life for VMC with 4 axis rotary? (not in the way when part start jump as a rabbit around the tool ) thank you
-
We do pieces 20 inch max so far I just asking if there is machine build for this kind of work and materials . I mean with vacuum or spatial filter for coolant . Graphite machine has so much RPM which definitely don't need for G10
-
Hi everybody , What machine you can advise for cutting materials as G10 ? As example we have graphite machines as Okada , but they too weak to cut G10 big enough parts .
-
Ok Thank you I will try to set this way unfortunately I almost don't have free "Call" parameters places (g or M).
-
I am using .ssb programs for the different probing cycles They are limited there is only 10 places for g call and 10 for M calls . Can you guys post an example of engraving code as using .ssb file ? thank you in advance .
-
anyone use .ssb or .lib for that reason?
-
hello mr. M, I would like to put macro (*********.msb file) for engraving in the msb directory (by instruction for the macro)
-
how possible to open this directory ?
-
Hello Can anyone explain ,please , what is it ********.msb directory and files for okuma p200 control?
-
So far I Hate this interface , sorry creators Way I work- I am typing by left hand ,right hand on mouse . So I am minimum using the top menu . People like me suppose to memorise new letter combinations for the command and it seem to me not as convenience as use to be .
-
Hello , Is it possible switch off output of "G30 P1" (reference point) command in Code ?
-
Thank you so much for you help
-
Finally just got full functional rotary for my Okuma - Genos -560 m If rotary on right (tool changer on left ) , chuck face to tool changer , how I suppose to configure Machine Components Manager-Rotary Axis ? X+ must be in red or X- ? (Sorry for such of primitive explanation) By default X+ red now Thank you in advance
-
Hi Everybody , We just got new used Okada graphite machine with Fanuc 160im (windows base) control and have some issue with it . when we use pulse handle (on x100 on manual mode) z axis still keep moving up or down about 0.5 inch after we stopped rotation . What parameters we must change to illuminate this issue I am tried to play with parameter #7100 didn't work . thank you in advance
-
Is it works for the older controls with Ethernet connection ? Or if code loaded in "md1: " drive only
-
Anyone using air spindle on Okuma Genos ? How do you physically setting it up ? Picture will be great Thank you
- 1 reply
-
- 1
-
-
Got it ! Thank you so much
-
Hi everybody , Another question to Okuma gurus . Long time ago , when I ran OSP 5000 or so I was be able to create blank material block . On my new control osp -p200 ma can't find this option (soft key ). Can you guys direct me ? I can't find in the manual (special function ) instruction for it . Thank you
-
Hi everybody Looks like problem solved . I don't know exactly , what happened but I just deleted program from control and loaded new one
-
Hi , Okuma Gurus , please help. Running to the stupid problem . For some reason control stop 's load programs from md1: drive . Getting alarm : Error 5202 no main program name 1 Completely stuck Thank you in Advance
-
is mill- turn will be included ?
-
So is it possible to run Mastercam X9 and MC4SW on same computer?
-
thank you Rob
-
Hello everyone , Just found mastercam x9 pc1 file saving process go for so long . Same file in x8 saving much faster . Anyone notice this issue ? Is it fixable ? Thank you in advance
-
thank you