mig
-
Posts
852 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by mig
-
Looks like newborn kinde of buggy
-
Me too
-
When I starting X7 after running update utilities some message pops up on Chinese languish
-
Ok , I found it works ,but you have to wach Parameters as "Radius of tool that shaped stock and Min toolpath rad that shaped the stock". For some reason it does't work some times when in my opimion it must work . I can't realy find the rule so far
-
It must work by way I want Look at this please : but does't work at all on open internal profiles
-
How did you do it ? Each time i trying to use it does't work . If i closing the contour -works fine . What is your magick ?
-
Hello, IS "dynamic contour" works for open profiles ? Thank you in advance
-
HI Doug, Thank you for replay. For some reason probe mp700 is most accurate but also cheapest one. Can you explain why? Is standard gauging software same primitive as before ? Also they asking 1180 bucks for the MID block restart . Before i ran very basic Okemas and MID block restart as standard option. We got Super NURBS , but why they recommend glass scale with it ?
-
Hello, Just about purchasing New OKUMA Genos 560 with control OSP P200m I have bunch of questions to someone who using this type of machine or similar. 1 What type gauging probe you recommend to buy a) OMP40 OMP 400VA c) OMP700 VA What is "manual gauging" on this machine ? What is "MARPOSS GAUGING INTERFACE" ? What is User Task3? Thank you in Advance
-
What I guess , problem with lengh offset come out after you swiching machine ( machine def ........xxxxxxx.mmd file) on existed operations.
-
My tools set correctly and this problem appears from time to time So looks like this is BUG!
-
Hi Anybody also has this issue ? Is it bug? Sometimes Mastercam (i running x6 mu3) when you picking up new tool, reading length offset number as head number while suppose to be dia offset and length offset equal tool number After picking up on this tool again it switching to right length offset Please look at attachment.
-
We machine ultem 1000 from time to time , but not production. Using regular carbide cutters . use coolant and wach not to over heat
-
Hello , How to use dynamic core here ? Thank you
-
Hello , Anybody have an expiriance to do surface milling with "seco" R220.21-3.00-R160.6A HIGH FEED MILLING CUTTERS ? How would you represent this cutter as bull nose or so ? Thank you
-
Fanuc 31i: How to retrieve a lost numeric value...
mig replied to Niezingerly's topic in Industrial Forum
How can i find " keystroke history "? -
Are you from Russia (where do you leave)? Looks like it explain everything .
-
Hello everybody , Trying to cut simple groove 0.25 inch wide by the grooving tool . Insert with (D) 0.25 inch . Groove definition- 1 point . In the "groove shape parameters " checking "Use tool with" number is 0.26 inch . Can some one explain ,why it happened an how i can make this number right ? thank you in advance
-
Thank you very much Jeff. This numbers looks much better to me.
-
Yeas , if you mean my house
-
machine don't have any counter balance ,only motor . .... 70 % is Normal but down and 20 % and up movement load 120% make me nervous . I think must be around 70 % +/- 10 % on up and down movements , so motor balancing weight
-
Hi All Please help me please to understand what is going on with my Okuma MC-V4020 We just got ball screw replaced on Z axis because unormal noise when z axis moving up and down . Dealer can’t give me an answer . Nose become not as strong as before but load on Z axis in up direction up to 120 % and on down direction 20% . When Z axis not moving load 71%. If someone who has same machine can check on yours and give me the numbers I will be grate appreciated . Thank you in Advance
-
Doesn't look like i have this problem . I tryed several times , no issue at all . "0" stock stay as suppse to be .
-
1+
-
You can make 2d operation (2d contour ) then toolpath surface- project this operation
- 24 replies
-
- 1
-
-
- 3D slot
- 3D chamfer
- (and 4 more)
