Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I have removed 9 from one computer and just running X. It was running OK now if I try and post I get error message-Error opening F:mcamxmillnc...
Anybody any ideas.
Geo
Level 2 in X allows for limited multisurface.
Multi surface rough toolpath
Multi surface finish parallel
If you need to use any other surface in level 2 each surface needs a new opp can be done but a real pain.
Every time I print with V9 or X I get a message that my SIM has been disconnected and I have to save any work and get closed down. If I go to hasp unility its cannot find HASP. Reboot computer and my HASP is back again, bloody annoying if you are trying to print 6 drawings.
I have seen a few others on here with similar troubles . anybody know what is wrong.
George.
For what help it maybe I have found that if you do not check either colour or shading in the system config.
But check the option in the print page setup,(the shaded option will be greyed out) but you can check colour / date and name. you should get colour printing on white background.
George.
Only a thought, but I swop my HASP between 2 stations day and night, and it seems only to find the HASP if you replace it with the computer off and restart. if you just plug it in although it tells you its there it cant find it.
Geo
I may well be doing somthing wrong but is net surface a lot easier than coons, for what looks like the same result. with coons multi patch surface was prone to trouble , with net 4 clicks and I have a surface. what am I doing wrong.
Geo.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.