George Hardwick
-
Posts
254 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by George Hardwick
-
Gcode. was thinking of putting X disc back in and doing a repair, would that work? George
-
Hi Gcode. Last night I removed V9 demo, that I was using to have a look at the lathe, but still have V9 installed. George
-
The following components are missing- MCBitmap OCX MC List ctl OCX Mastercam cannot start. Does anybody know what this is all about. and how have they all of a sudden gone missing... George.
-
Maintenance expiring
George Hardwick replied to Matt Berube at Ferron Mold's topic in Industrial Forum
John. Just out of interest you are testing MR0105 ? When will that be available? Geo. -
Worth giving this a look- http://www.tipsformanufacturing.com
-
Back plot is running drill paths over and over
George Hardwick replied to Saultspics's topic in Industrial Forum
I posted this a while ago, I got it aftet SP1 update.As I stated then if you slow the speed down it just keeps repeating the drilling untill it gets fed up and stops. As Heavymetl said you should not have to keep altering card settings. Geo -
Way too many zero's, someone said that a Pearl Harbour Mike....
-
Thad. That is what is annoying before I installed it was working great, I saw the thread and thought I dont know what they are complaining about, now I know... Also told by reseller to remove SP1, but just cant find anyway of doing it..... But its all good fun eh... Geo
-
Hi Thad. The SP1 updat just out. Geo
-
After installing SP1 Update, my backplot seems to be playing up mainly on drilling holes, if you slow the replay speed down it goes slowly through the first couple then speeds up and completes the remaining at high speed. Or on a long series of holes it keeps jumping backwards and forwards at random. Any ideas. If not how can I remove the update. Geo
-
Thanks Steve, I gave some thought to it after I posted, and decided that maybe it would not be very clever to have them turned off after all. As you say maybe just dragged out of the way. Thanks for the reply. George.
-
Is there a way of removing screen prompts? I know you can make them samll med or large but they always seem to get in the way, and have to be dragged somewhere else.. Geo.
-
It saved it as an mcx file yes. G.
-
Printed out a layout and closed MCX still with the layout on the screen. MC said it had a problem with saving the file and closed down on me. then when I went to open file again " This is not a mastercam file and is not in any format recognised by mastercam." lost the lot. I think I still have it on another computer as a MC9 file. but not very funny. Anyone had this happen or is it just me again.... G.
-
Mastercam X SP1 - Update 1
George Hardwick replied to Ken Erman from CNC Software Inc.'s topic in Industrial Forum
Lynnz. Mine cured itself the next time I opened it found the HASP and has had no trouble since. G. -
Mastercam X SP1 - Update 1
George Hardwick replied to Ken Erman from CNC Software Inc.'s topic in Industrial Forum
Just loaded update but cant get back in cause it cant find my hasp I know ther is a file I need to get but I cant get the link to that either. can any one post it for me? tA gEORGE. -
No Brendan, this man has read the rules and is taking the wee wee. and he calls himself Mr xxxxbrick. Yes he has come to a really great place.Thats enough imformation.......
-
nail on the head.Mike.
-
Seems you cant download it to a folder needs to be downloaded to a disc, tried it to a folder again without success but OK onto a disc. Geo
-
Seems to be succesfully downloading to a disk, and thats what it tells you to do in the instalation guide so maybe they know best.. Ta George
-
Gcode thats my trouble down load to a folder in my docs and then the folder is empty ? is this what you get. Geo
-
Thanks Merlin. Just got back from the pub. Geo
-
I set to update to another computer by selecting a folder to save too, then updated my connected computer. after I successfully updated the connected one , I had a look in the remote folder and its empty... now I can get another update as my connected one is already updated.. What can I do.. Geo
-
Before you start ensure that you do not have any entities selected, if you do press the unselect button.right click on levels,select your points by either clicking on them or select all entities ,points. press green end selection button,change levels dialog box opens, choose move/copy ,select main or number level, press green tick (OK) job done. Thants how it works for me.
-
Bad workman and tools springs to mind!!!!