Arrowhead
-
Posts
17 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Arrowhead
-
Found annealed Ultem much more stable to machine. Non annealed will move.
-
Prism is our reseller also. We actually had our codes before the software.
-
We received our codes also
-
I found the problem, my target path in my shorcut properties should have been mc9lathe9.exe / 3 . We are running a bundled package of mill3 and lathe . Thanks for the replies.
-
Hi, Long time lurker here. We recently purchased lathe9.1 . I am trying to access the milling toolpaths but am unable. When i go to toolpaths/nextmenu/...there is no mill option. Is it my target in my lathe shortcut properties? As it is now it is Mcam9lathe9.exe/s. Any help would be appreciated. We are running 9.1 MR0304 Thanks glenn
-
Phil, Our DMU 50e would get stuck during a toolchange pretty often. You may want to make sure the sensor and reflector are cleaned. Coolant would block the sensor and the machine could not recognize the tool during a toolchange. They are easy to find, once the double doors slide open they are right in front of the carousel. We ended up making covers for them. How's the new job going? .... Kulpsville ... Greene Tweed maybe ?
-
Ti6ALV heart pump housings,,tons of 5 axis toolpaths and recreated geometry,drat those surfaces that don't "form a row"! Titanium impeller's next.
-
Count me in,,, Deckel Maho 50e
-
We are running a DMU 50e with a Cimco post. After a little tweaking by Lars from Cimco it is running beautifully.
-
hi, a row consists of adjacent surface edges which are equal in length and tangent to each other.try to create surface edges to create a single coons surface.You will have to re-create a surface when surfaces do not form a row. hope this helps
-
While trying to execute the floor 5axis c-hook on a 5 axis flow toolpath,i am receiving a debugging error (sfm_class():unknown op code 16)after i save the nci file. Is this a post issue or am i missing something?
-
sorry about that,, how do you change surface uv direction in mc? i am extracting my surfaces from a solid.
-
thanks for the fast response guys,
-
hi,first time posting. i am using a 5 axis flow toolpath on my part but since the surfaces donot form a row i am unable,,would anyone know if "rhino" is able to spin quads so all surfaces flow in the same direction? this is a great forum and i have been learning alot from everybody thanks
-
glenn from pennsylvania. i program and setup 5 axis dmu50 e. we run mastercam and vericut.it looks as though there is alot to gain from this site.