quote: Well it was'nt under his watch that the entire bin laden clan was put on a charter plane and flown out of the U.S. the day after 9/11, either... I always love the democratic slant on this.. The Bin Laden clan as you put it were family members in the boston area who not only have nothing to do with their brother but condemn his actions and feel he is a disgrace on the family name. With that stated they left this country out of safety concerns of what the american public might do to them when it was realized they were related ... What you have to understand is the sheer size of that family ..isn't there in the area of 50 siblings? Anyone here ever had a brother or sister that was in trouble while other siblings were law abiding? Don't condemn the whole family for the actions of 1 moron who happens to carry the family name .. worry about the people who follow said moron and believe in his cause ....then elimnate every last one of those people .,...

congrats

Very sorry for your loss Gary ..

OK ..so what kind of guitars you guys playing these days?

We'll be there tomorrow

I'll second that.. I run a forum for Jackson guitars and deal with the same nonsense from time to time with people who are obnoxious and then think they are supposed to be embraced by the community after starting trouble. Knowing you have already had issues here what would even make you post a political post like that? My guess is your looking to stir trouble and nothing less....

Worked great guys ...thanks for the help

ptap # Canned Tap Cycle frrtap = 1 / n_tap_thds n, sgdrill, pg9899, *x, *y, *depth, *refht, *dwell, *frrtap

I'm having an issue with our Cent6 post. We are tapping a plate with both 8-32 and 4-40 taps .. The program is drilling all holes then tappping all holes (not drill,tap,drill,tap) If I run 2 tapping cycles next to each other I get a good tap cycle then the 2nd cyle removes our g88 and if feeds down and rapids to the next hole without reversing and retracting .. O1234 (T ) N1 G20 G40 G70 G90 N2 T1 M06 ( #8-32 TAPRH DRILL/MISC ) N3 G91 D1 G43 H1 Z0.0 N4 G90 N5 G00 X-2.6686 Y2.6251 N6 S500 M03 N7 G88 G99 X-2.6686 Y2.6251 Z-.5 R.1 P0. F.0313 N8 G80 N9 G00 G40 G32 N10 T2 M06 ( #4-40 TAPRH ) N11 G00 X-2.6686 Y2.6251 N12 G91 D2 G43 H2 Z0.0 N13 G90 N14 S500 M03 N15 G99 X-2.6686 Y2.6251 Z-.25 R.1 P0. F.025 N16 G80 N17 G32 M05 N18 G53 Y0.0 N19 M30 % If I change this to a drill,tap,drill,tap cycle it outputs the G88 normally... Any ideas here guys? Thanks Kevin

James you forgot to mention the new retina scan that they will be using instead of a hasp.. apparently if you try to pirate this version it will burn your eyes out of their sockets ...

quote: No. I doubt it. NT does NOT support USB. Yes there is additional software that allows the alladin drivers to work. I believe this is what he is saying is password protected. When I had this issue Iended up getting it right from my reseller ..

Jay, Have you ever written hacks into the UBB? There is a hack that will upload and presize pictues within the forum. I've written spell check into my forum before but never this particular hack ...

Yeah so .. Thanks for rubbing salt in the wound Steve .. I wass looking forward to 65 degrees and you'll be in 80 .. LOL .. this a vacation?

quote: Been raining here in xxxx-achusetts for 3 days now. Maybe the weekend will be nice. I'm hearing it will be ..gonna be a good weekend to go for a ride ...

Steve, Are you sending us a disk or will it be another download Kevin

I've done my training through S4Auto too and I'll also vouch for these guys. They have been nothing but helpful since we got invlolved with mastercam from training to support. When I took the training Steve taught the course and it was pretty informative and friendly .... Good luck .. Kev

Dave, Is quick relpy and add on or a new upgrade from the UBB?

quote: I manually tapped 500 1/4-28 holes 1.5" deep on a little mini drillpress with a micro reverse switch on it, at around 500 RPM........took about 1.5 seconds a hole in 440 SS flooded in oil didnt break one tap.....infact...used the same one..... you my friend are a brave man ..

Set your settings in Cimco at Baud 38400,Stop bits 2,Parity even,Data bits 7 On the Fadal scroll to the Enter next command and type in CD,10 enter TA,1 Enter CD,10 sets the machine baud at 38400 TA,1 opens the port if you want different baud rates type cd,11 this is 57600 cd,12 is 115200 Just make sure your cimco editor is set the same Then hit send from cimco and it should work provided your cable is pinned properly to match the machine This works for me everytime [ 02-03-2004, 07:32 AM: Message edited by: KMaynard ]

Here's my newest toy ... [ 12-08-2003, 07:22 AM: Message edited by: KMaynard ]

on CNN today http://www.cnn.com/2003/US/South/11/20/tra...s.ap/index.html

Geez it's one thing to come in and ask for something in a respectful manner. But to come in and ask and take a shot at the members as you have, shows a lack of respect for the board and an arrogance that quite frankly no one here deserved. I run a BB for Jackson/Charvel guitars and I could see the members on that board reacting the same way as the members have here over the prodding remarks you made to open the thread. You end up making yourself a victim when in fact you started shooting and then made yourself an open target. Now your not happy with the responses you have gotten.. I don't get it.. Are you enjoying the attention? Is that why you started the first post as you have? It's a shame your first post didn't start out with Hey guy's, This format hurts my eyes and I was wondering if there was any chance of getting the font colors changed ... thanks .. instead you have one open hand and one fist ready to swing. Do ya think maybe that was a catalyst to this whole issue? .. just a thought Kev [ 11-13-2003, 07:32 AM: Message edited by: KMaynard ]

quote: I hope older memebers of this forum (some of which think they own this place) will not jump in defence of existing color. So what your saying is your more important than some of the guys that have been here since the begining. ....

Hourly here .. "Model Shop" .. The mentaltiy here in Engineering for salaried guys is ..40 hours is not fulltime .. don't wanna go to salaried ..I'll take my good ole hourly rate

It's funny how i'm reading that Harleys are way over priced. Seems like over the last 5 years the "Japanese Cruiser" large cc market is catching up quickly. At least with the harley you wont lose your shirt in the end .. maybe just along the way in maintainence costs .. As far as the comments about the anniversary bike quantities .. apparently Harley decided to over build this year .. extended their build time by 2 months which added about 30k more bikes to the line this year. This worked out decent for anyone looking to buy late season as Harleys were going for MSRP and under.. that's rare up here in the northeast as they mark them up thousands above msrp ... Worked out good for me ..I now went from a 1200 sport to a 1450cc softail nighttrain ... and the wife has her 883 .. it's not about anything less than having pride in what your riding ... if having a royalstar makes you grin driving down the road then make yourself happy ... btw all you sport bike lovers.. please explain to me how you can be comfortable on long trips in that postition ..doesn't you hands wrists and elbows ache after a while? [ 08-18-2003, 08:33 AM: Message edited by: KMaynard ]