Threept82
-
Posts
812 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Threept82
-
quote: Hope that helps. Hell No. Will someone please get my mask.
-
Hardmill, Your back
-
Thanks Guys betts helped me out.
-
Hi Guys. I'm looking to see if anyone in MC land has the mmouse.dll c-hook they could E-mail me. I looked on the ftp site, Not there. there is the Mcutil.dll that is similar but I don’t care for it. I lost everything awhile ago and cant find it. I ran a search, but no luck. Thanks
-
Thanks Guys. Figured out Filezilla. Ftp site doesn't look the same through it but I can get to it now.
-
quote: If you are a Firefox/Mozilla user try downloading Filezilla. jmparis What do I download from this site?
-
My system crashed. They swiped it clean reloaded windows XP and I still can not get to the FTP site.
-
Hi Guys. Anyone else having trouble going onto the FPT site?
-
El Scotthead Always looking for a different perspective.
-
Wow. Perfect. I won't forget that one. Thanks
-
Hi Guys I need to give tangent points to one of our manual guys so he can program it into one of our EasyTraks. I drew the contour and now I would like to have MC put a point at every element start and end point on the contour. I already gave the guy his info. by putting a point at each place by clicking at it but I can't seam to find a add point option to do this all at once. Is there one that I didn't find or a C-hook somebody knows about for next time. Thanks
-
Niigata Horizontal with high speed machining. I may even fit it in memory and if not I've dripped large programs with short moves at fast feeds before on it. It will have no problem.
-
HevyMetl Thanks. There sure is a lot of code for such a good finish. Time to Drip.
-
-
HevyMetl Did you recieve my E-mail?
-
El Scotthead I do need an 8 micro but I meant to ask was what finishing surface option would you use? Scallop, Parallel, Flowline .....
-
quote: So since we are explaining, what is 3.82? 12/PI= 3.82 Sfm * 3.82/Dia= RPM Sorry took so long I was re-reading thread and saw that I missed that part.
-
El Scotthead. What finish surface would you use? I will be making a male electrode.
-
quote: -------------------------------------------------------------------------------- perfecseal mankato Member Member # 1786 Tim, check your e-mail -------------------------------------------------------------------------------- mcpgmr Member Member # 9558 Tim, check your e-mail Beat me to it. Paul Tim, check your e-mail
-
So the smaller the ball the better?
-
quote: .06 meant exactly 6 cents. Betts added his 2 cents twice for a total of .04. Then I threw in my 2 cents for a total of .06. Sorry for the confusion. I suck at this job.
-
quote: The .06 refered to "six cents". I still have no clue what "six cents" represents.
-
EDM electrode. I'm going to make the electrode (letting it run over night) in case I cant get finish in part. Which is 01 tool steel.
-
The material is graphite. quote: Now up to .06 up to .06 stepover? Data-flute is the cutters I use most. The bigger the end mill= the better finish wise?
-
Hi Guys. I need to 3D profile a part and I need a 8 micro finish. The part can not be polished, it must be machined in. Looking for formulas or other information to figure out Cusp-vs-Ball mill-vs-Stepover amounts. I can just guess and adjust from there but its a pretty big program. I hoping you die hard 3D Guys can help. Thanks