All Activity
- Today
-
how can i lLoad double hole boring holder on turret? should i download the cad file? (mill-turn)
-
AMM Hotel Couture joined the community
-
Huy Tuan Nguyen joined the community
-
van tam started following Mastercam X5
-
van tam joined the community
- Yesterday
-
Does anyone know if you can get the right output out of Productivity+ to run Heidenhain probes on a heidenhain controller i.e the onboard probing cycles ?
-
giovanni.tierno joined the community
-
Still messing with this. Found something interesting. If the feed rate in both the tool branch & cut parameter branch are all the same, (as mine were) I get no rapid down: No when I changed my feed rate to 20.0 in the tool branch it works fine. Interesting:
-
The Store on this website lists X4 tutorials Whether they are actually available or not, I couldn't say.
-
Krish0090 joined the community
-
Need Old version tutorials X4 specifically
JParis replied to Toybreaker's topic in Educational Forum
Ebay might have some older manuals reasonably priced... That's 16 year old software....ancient in software years. -
김창섭 joined the community
-
Noshad joined the community
-
sajin joined the community
-
Paul Wallace joined the community
- Last week
-
Just like the title says. I have X4, no interest in upgrading, I am using an old small desktop 4 axis cnc machine. Going to be doing mostly small 3d wax seal stuff. I got this software with the hasp when My ship decommissioned and they told me to "dispose of it", well my wife has a need for me to relearn how to use this software and make her little machining center make her some money.
-
GOTO command not working with 5 axis program
mkrmrkr replied to Shiva.aero's topic in Machining, Tools, Cutting & Probing
@Shiva.aero are you able to increase this number? How did you get around this limitation? -
Appreciate the quick responses guys. Z2G it is. Thanks again.
-
Your settings look correct.....I use this toolpath frequently and checking "rapid down" as you have yields rapid motion between pecks on all our machines. I'd send a Z2G to your reseller.
-
The rapid on the tool page only controls the approach and end retract not in the cycle itself. Give high feed rate is your only option that I am aware of. You can put in a request and see what they say.
-
Using Advanced Drill for the first time. Can not seem to get the drill to rapid back down for the next peck even though I have the Rapid down box checked in the Cut Parameters branch. It rapids down same as the programmed feed rate. Also, what purpose is the Cutting Parameters feeds / speeds in the Tool branch. Seems that the Cut Parameters branch page feeds / speeds overwrites it. Thanks everybody.
-
Need to get a hold of your dealer so they can remote in and see what is going on.
-
Time for a call to your reseller
-
Windows 11 is apparently problematic enough that its market share is actually declining. I built a nice new rig for my dad last year, and put 11 on it. Updates keep breaking things, so we're considering dropping it back to 10. https://gs.statcounter.com/os-version-market-share/windows/desktop/worldwide
-
I would go into task manager and kill everything related to mastercam. I had to do with the camplete the license thing got hung up and a restart wasn't fixing it
-
Yes, still doesn't work.
-
Have you tried running an an administrative?
-
I am also having an issue with Mastercam where it never starts at all, when I attempt to open it, it does nothing. I checked event viewer and found this: Faulting application name: Mastercam.exe, version: 26.0.7341.0, time stamp: 0x645da48c Faulting module name: KERNELBASE.dll, version: 10.0.22621.3527, time stamp: 0x83efbeab Exception code: 0xe06d7363 Fault offset: 0x000000000006543c Faulting process id: 0x0x6C6C Faulting application start time: 0x0x1DAA7D2759B8F4C Faulting application path: C:\Program Files\mcam\Mastercam.exe Faulting module path: C:\WINDOWS\System32\KERNELBASE.dll Report Id: c5348f50-e072-44e2-9e17-88b1ce8beeec Faulting package full name: Faulting package-relative application ID: Any suggestions? I've reinstalled the application multiple times, repaired C++ redistributable, ran sfc /scannow, nothing seems to work.
-
I am also having the same issue. Mastercam never starts at all, when I attempt to open it, it does nothing. I checked event view and found this: Faulting application name: Mastercam.exe, version: 26.0.7341.0, time stamp: 0x645da48c Faulting module name: KERNELBASE.dll, version: 10.0.22621.3527, time stamp: 0x83efbeab Exception code: 0xe06d7363 Fault offset: 0x000000000006543c Faulting process id: 0x0x6C6C Faulting application start time: 0x0x1DAA7D2759B8F4C Faulting application path: C:\Program Files\mcam\Mastercam.exe Faulting module path: C:\WINDOWS\System32\KERNELBASE.dll Report Id: c5348f50-e072-44e2-9e17-88b1ce8beeec Faulting package full name: Faulting package-relative application ID: Any suggestions? I've reinstalled the application multiple times, repaired C++ redistributable, ran sfc /scannow, nothing seems to work.
-
Remove the solid history.
-
Setting up defaults for Machine Sim and Setup Sheets
SuperHoneyBadger replied to Corey Hampshire's topic in Industrial Forum
Been looking for a method to do this lately as well. Found it today! The menu to choose a Default Simulation Machine for a given Machine Def is under 'General Machine Parameters' in the Machine Definition Manager. Found this thread last week while I was trying a few things out, wanted to update it with an answer. I'm using 2024 U6. -
Windows 11 Update corrupting Mastercam.Workspace
gcode replied to crazy^millman's topic in Industrial Forum
I bought a new PC last year that came with Win11 It's got 6 months on it now and I've had no issues, with Mastercam or any of the other CAD/CAM apps I run We've update 2 engineering PC at work from Win10 to 11 including mine. My work PC has been in Win11 for a couple of months.... no issues A coworker recently had a made to order Win11 and was suffering crashes so bad it was unusual after a bunch of trouble shooting he found the problem. He set his Mastercam installs to "run as an admin" which fixed the problem. As for security and spyware, I have turned a bunch of stuff off and opted out of things. The only way to eliminate it completely is air gap your machine.
Join us!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.