Mastercam verify error

[alizezo]

Hello 

i have a problem in Mastercam Verify and machine simulation.

the cutting tool alwayes go to X0 Y0 Z0 after all stratiges but in toolpath there is no return to  X0 Y0 Z0

what could be the problem ?

[gcode]

check your machine home settings

[alizezo]

how can i check my machine home  zero position please 

[gcode]

Machine/Machine Definition/Axis Combinations/Home Position

be sure to reload the Machine after you've updated  the Home Definition

[alizezo]

I changed the home position to x0 y0 z400 but still the problem 

[Leon82]

Do you have a reference point checked?

[alizezo]

YES I CHECKED THE REFRANCE POINT

 

[JParis]

Maybe share a file?

[alizezo]

This is the file please check

4-axis.mcam

[So not a Guru]

It ends correctly on my seat.

[alizezo]

So what could be the problem 

[JParis]

21 minutes ago, alizezo said:

So what could be the problem 

Simply put,.it's not in your tool path settings...

I think the only thing that leaves is your verify settings...

You might try closing Mastercam, go into 

C:\Users\<user name>\Documents\My Mastercam 2020\Mastercam\CONFIG

and remove the mcamx.config file...

Restart Mastercam

and retry verifying your file...

It's in the settings but not sure where...I played with this a bit this morning trying to find and had no luck

[huskermcdoogle]

What maintenance release of 2020 are you running?  This was a bug that I think was fixed with MU2.  If you haven't installed it, do.  Otherwise, you can get around it for verify by setting it to 5 axis instead of 4 axis and then use limits to keep it as a 4 axis output path.

[alizezo]

Ok thanks i will try