how many machines do you program

[Mau7x57]

1 old Haas VF1

1 old Haas VF2

1 Haas VF3

1 Haas VF3 w/pallet changer

1 Mori Seiki SL25

1 Mori Seiki SL154Y w/live tooling

1 Fortune VT26

1 Fortune TNS1A

1 Hitichi Seiki (needs to be turned into an artifical reef)

1 Sodick wire edm

 

2 programmers - 1 for VMC's, 1 for the wire and lathes.

[Hardmill]

I design/model, program and set-up a VF3.

Got a youngster that I get to train too.

"Lucky him, Huh??"

 

 

PEACE

[Chris Rizzo]

3 haas vmc's

1 mori vmc

1 "other" vmc (Vertical Mr. Coffee)

[Oppiz]

2 VMC's Cincinnati & Bridgeport

1 Lathe Hardinge (live tooling,sub spindle)

1 WEDM Mitsibishi

1 sinker EDM Mitsubishi

2 CNC gr1nders Bridgeport & Parker-Majestic

 

Mostly short runs, no large quanities.

[Bolts-and-nuts]

9 VMC's 3 of which are 5-axis....

 

... those were the days.

 

now as a tech support for Germen CNC router Manufacturer and without MasterCAM on my side.... Boring I want my Mastercam days back.

[RandyN]

Is this another "who's got the biggest johnson" thread?

 

With the delivery schedual here and the ammount of tools we produce in a weeks time, we put out 20 machines worth on 3 machines!

[spade117]

7 total:

2 ra pallet/matsurra-vmc's

1 brother-vmc

1 robodrill-vmc

2 kitamura-vmc's

1 toyoda-hmc

[John13]

2 HAAS mini mills--program/setup/sometimes run

 

plus design/build all fixtures

[Charlie Pierson]

7 Tsugami Horizontals

3 Nomura Swiss-type lathes

3 Kitamura Verticals

4 Traub Verticals

2 W/S Lathes

1 Normac Wheel Dresser

1 Spiral Grinder

2 Drillmate Verticals

1 Mazak Laser

1 Trumpf Laser

2 Bridgeport / Harig CNC surface Grinders

1 Bostomatic SPC2 (for etching)

5 Bostomatic w/ Fanuc 6mb (for etching)

3 Mazak Verticals (supplement w/ gcode subs)

1 Mazak Multiplex (supplement w/ gcode subs)

 

 

cp

[PGW Steve]

Like it says down below. However, I don't mess with the lathe at all, I am the mill freak.

[Flycut]

I start part time at a new shop on friday, so add a VF1, VF3 and a bridgeport to my list.